Truck Bed Rack Cross Bar Upright Kit
Uprights and Bars for a Bed Rack Build
This is the frame that turns bed rails into a rack. Go Rhino's Overland Xtreme uprights and crossbars mount to the bed and give you structure above it, which is somewhere to carry what will not fit inside the bed and somewhere to mount what will not go anywhere else.
Find Parts for Your Vehicle
Measuring your bed
Put a tape measure inside the bed, from the inside of the bulkhead (front wall) to the inside of the closed tailgate. Round to the nearest inch — a 69" measurement is a 5'8" bed.
Bed length is measured inside the box, not along the outside of the truck.
Still unsure? Leave it blank to see every length that fits your truck, or call 888-865-4024.
A bed rack is a modular thing. The uprights set the height and carry the load down into the bed rails. The crossbars span between them and are what everything else attaches to. Buying the kit gets you that structure, and what goes on top of it is a separate decision made later.
All three listings here are Go Rhino XRS Overland Xtreme, in black, built to work within that system. If you already run Go Rhino bed hardware, these are the parts that build up from it. If you are starting from nothing, expect a rack to be a system purchase rather than a single item in a box.
Height is worth thinking about before you order. A rack standing above the cab line carries taller loads and looks the part, but it changes what fits in a garage and what the truck does in a crosswind. Decide what you are carrying first, then pick the configuration.
Common Questions
What is in an upright kit?
Read the listing for exact contents, but the parts in this category are the vertical supports that mount at the bed and the crossbars that span between them. That is the structure itself rather than what mounts to it. Accessories such as lighting and carriers are bought separately, since what people put on a rack varies widely.
Will this fit my truck?
The kits here are Go Rhino Overland Xtreme XRS parts listed for specific applications. Use the vehicle selector to filter, then check whether the kit assumes other Go Rhino bed hardware is already installed. If you are thinking of mixing brands, confirm it before buying, because bed rack systems rarely cross over.
Can I still use the bed with a rack on it?
Yes. The uprights sit at the bed rails and the space underneath stays open, so you keep the bed for what it is for and gain a level above it. What changes is loading tall items over the side, since the bars are now in the way, and the overall height of the vehicle.