One full lounger, and seats for the rest of them.
The Core 1800L is the rectangular Core: a full-length lounger down one side and upright seating around the rest, for four to five people. Eighteen stainless jets, 205 gallons, and a 78″ by 68″ footprint that goes flat against a wall.
Everything the 1800L is, on one table.
Taken from DreamMaker’s own specification for the Core 1800L. Spa pricing is quote-only, so the number that would sit here is a discount instead.
| Specification | DreamMaker Core 1800L |
|---|---|
| Seating | 4–5 person |
| Dimensions | 78″ x 68″ x 32″ |
| Spa volume | 205 gallons |
| Dry weight | 238 lb |
| Jets | 18 stainless steel |
| Electrical | 120V 15 amp / 240V 40 amp |
| Heating | 1kW / 4kW |
| Controls | Digital |
| Pump system | 2 HPR two-speed |
| Interior lighting | LED footwell light |
| Filtration | Easy Kleen Convex 2 |
| Easy Kleen ozone | Optional |
| Insulation | Therma-Zone |
| Cover | Weather Shield |
The only Core you can lie down in.
Full-length lounger
A contoured recliner that takes one person head to foot, with jets down the back and into the calves. The 1800C and 1800R have upright seating only.
Seats
The lounger plus upright seating around the remaining three sides, so the household that disagrees about loungers can have both.
Inches
Rectangular, which is the easy shape to place: it goes flat against a wall or a deck rail without leaving a wedge of dead space.
Lounger down one side, seats around the other three.
Looking straight down at the 1800L: the lounger runs down one side, with upright seating wrapped around the rest.
The lounger carries the densest jet cluster — back, hips and calves — because it is the seat you stay in longest. The upright seats each get a shoulder and back pair, and the footwell in the middle is shared.
The topside digital control sits on the near rim and the filter well is at the front of the footwell, so routine maintenance is reachable from the step.
Built to be left outside.
The Core line is one shell material and one finish. What varies between the three models is the shape, not the build.
Syncrylic shell in Mystic Diamond
Syncrylic is DreamMaker’s own shell material: it looks like acrylic but is formulated with the impact resistance of high-grade polyethylene, and it is lighter than a conventional acrylic shell of the same size.
The Core line is built in one finish — the Mystic Diamond grey shown here — which is part of why it costs what it costs.
Therma-Zone insulation and Easy Kleen filtration
Therma-Zone insulation holds the heat in the water rather than letting it out through the cabinet, which is what keeps a 120-volt heater viable through an Alabama winter.
Water is handled by the Easy Kleen Convex 2 filter, with the Easy Kleen ozone system available as an option if you want to run less chlorine.
The cover, the steps and the chemicals come with it.
Three things every spa needs on day one, included rather than quoted separately. Spa pricing itself is quote-only — it is discounted further than we are allowed to advertise, so tell us the model and your delivery address and we will come back with the number.
Weather Shield cover
Lighter than a conventional cover and insulated to hold the heat in and the debris out. The cover seal strap latch system comes with it.
Designer spa steps
Entry steps built for the spa rather than adapted to it, with a non-slip tread.
Start-up chemical package
The water treatment and test kit that gets the first fill balanced and clear, so the spa is usable the day it lands.
Sit in one before you buy it.
DreamMaker spas are on the floor at H&H stores across Alabama, Georgia and Mississippi.