DreamMaker — Comfort Collection

Six or seven seats, four pillows, twenty-three jets.

The largest DreamMaker we stock. 82″ square, 250 gallons, four cushioned headrests and twenty-three adjustable stainless jets — and it still starts life on a 120-volt household outlet.

DreamMaker Comfort 2300S hot tub in the White and Black Syncrylic finish
Specifications

Everything the 2300S is, on one table.

Taken from DreamMaker’s own specification for the Comfort 2300S. Spa pricing is quote-only, so the number that would sit here is a discount instead.

$1,200
OFF
SpecificationDreamMaker Comfort 2300S
Seating6–7 person
Dimensions82″ x 82″ x 32″
Spa volume250 gallons
Dry weight324 lb
Jets23 adjustable stainless steel
Pillows4
Electrical120V 15 amp / 240V 40 amp
Heating1kW / 4kW
ControlsDigital
Pump system2 HPR two-speed
Water featureFountain with LED light
Exterior lighting8 LED corner lights
Interior lightingLED footwell light
Easy Kleen ozoneOptional
InsulationFoam barrier
CoverWeather Shield
Built in

The one you buy when everybody wants in at once.

23

Adjustable stainless jets

Three more than the 2000S, spread across a shell that is 15″ wider in both directions, so nobody is sharing a jet.

4

Cushioned headrests

Four pillows around the rim — the 2000S has none — which is what makes the difference on a long soak.

250 gal

Water volume

Half again the 2000S. More water is more thermal mass: slower to heat, and slower to lose it when six people climb in.

Syncrylic finishes

Five shell and cabinet combinations.

Syncrylic is DreamMaker’s own shell material: it looks like acrylic but is formulated with the impact resistance of high-grade polyethylene, and it is lighter than a conventional acrylic shell of the same size.

DreamMaker 2300S hot tub in the White and Black Syncrylic finish
Syncrylic finish

White / Black

A white shell against a black cabinet — the highest-contrast pairing in the range and the one most people picture when they picture a hot tub.

White / Black shell and cabinet swatch Shell & cabinet
DreamMaker 2300S hot tub in the White and Grey Syncrylic finish
Syncrylic finish

White / Grey

The same white shell with a grey cabinet, which reads quieter against a deck or a painted house than the black does.

White / Grey shell and cabinet swatch Shell & cabinet
DreamMaker 2300S hot tub in the all-black Syncrylic finish
Syncrylic finish

Black / Black

Shell and cabinet both black. It disappears against a dark patio at night and shows water spotting the least.

Black / Black shell and cabinet swatch Shell & cabinet
DreamMaker 2300S hot tub in the Sahara and Coffee Syncrylic finish
Syncrylic finish

Sahara / Coffee

A warm sand-coloured shell over a brown cabinet, for stone, brick and timber surroundings rather than painted ones.

Sahara / Coffee shell and cabinet swatch Shell & cabinet
DreamMaker 2300S hot tub in the Mystic Syncrylic finish with a black cabinet
Syncrylic finish

Mystic

A soft grey shell over a black cabinet — the middle ground between the white and the all-black, and the only Comfort finish that is neither.

DreamMaker Comfort 2300S hot tub in the Sahara and Coffee finish, side view
Living with it

82 inches square, and worth measuring for.

The 2300S is 82″ on both sides and 32″ deep, and at 324 lb dry it is the heaviest spa in the DreamMaker range. Full, that is a real load — a slab or a deck rated for it, and a clear path wide enough to walk it in, are both worth confirming before you order. Our delivery crews do this survey as a matter of course.

It ships wired for a 120-volt 15-amp outlet with a 1kW heater, so it runs off a standard household socket with no electrician. An installer can convert it to 240-volt 40-amp with a 4kW heater later, which roughly quadruples the heating power and shortens recovery between soaks.

The seating is arranged for six with room for a seventh, and four of those seats have a cushioned headrest. Deep water stream back channels run behind the backs, and the twenty-three jets are aimed at shoulders, back and feet rather than spread evenly.

Bought from H&H

The cover, the steps and the chemicals come with it.

Three things every spa needs on day one, included rather than quoted separately. Spa pricing itself is quote-only — it is discounted further than we are allowed to advertise, so tell us the model and your delivery address and we will come back with the number.

Get Your Best Price

Weather Shield cover

Lighter than a conventional cover and insulated to hold the heat in and the debris out. The cover seal strap latch system comes with it.

Designer spa steps

Entry steps built for the spa rather than adapted to it, with a non-slip tread.

Start-up chemical package

The water treatment and test kit that gets the first fill balanced and clear, so the spa is usable the day it lands.

Sit in one before you buy it.

DreamMaker spas are on the floor at H&H stores across Alabama, Georgia and Mississippi.

Find Your Nearest Store