2019-2024 Ram 3500 8in. 4-Link Diesel engine - Add-a-leaf 5in. block with overload - 8 bolt T-case T-Case - NX2
At this height driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally a high clearance transmission crossmember supplied to allow sufficient clearance.
At this height driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally a high clearance transmission crossmember supplied to allow sufficient clearance.
- Heavy duty 4-link improve strength handling and caster control
- Front high strength progressive rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
- BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance
Information:
This kit requires the use of an aftermarket front driveshaft (not provided) in addition to the (provided) indexing ring kit - BDS122624 (6-bolt) or BDS122421 (8-bolt). Both must be installed however due to variations between truck configurations we recommend installing the kit prior to taking measurements for the aftermarket front driveshaft to ensure correct length. Vehicle can be driven without front driveshaft. Kit was tested with a Drive Line Plus flange and driveshaft however other high angle driveshaft options can be used.Application Summary:
| Year | Make/Model |
|---|---|
| 2019-2022 | Ram 3500 |
This item is a package with the following components:
| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Front Lift Height | 8 |
| Front Lift Method | Coil Spring |
| GTIN | 00840416408065 |
| Hazardous Material Code | N |
| Indexing Ring Option | 8 Bolt |
| Installation Difficulty | moderate |
| Installation Time | 8-10 Hrs |
| Installation Tools | drill-puller pitmanArm-welder |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Rear Lift Height | 6 |
| Rear Lift Method | Block |
| Rear Lift Option | with factory rear overload leaf |
| SDR Required Flag | N |
| Shocks Included | Yes |