17-19 Super Duty 8in 4-Link System - Diesel engine
At this height driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally a high clearance transmission crossmember supplied to allow sufficient clearance.
At this height driveline adjustments are necessary to allow the use of the factory driveshafts so a precision-built transfer-case indexing ring featuring ARP-studs can clock the transfer case and improve the front driveline operating angle. Additionally a high clearance transmission crossmember supplied to allow sufficient clearance.
- Easy 100% Bolt-on installation
- Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
- Heavy duty 4-Link control arms offer improved handling stability strength and caster control during wheel travel
- Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
- Glideride leaf springs to provide full lift height and increased capacity with a built in overload spring
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Information:
The indexing ring is not designed for manual shift transfer case models. Modification of the shift cable mount will be required.Application Summary:
| Year | Make/Model |
|---|---|
| 2017-2019 | Ford F-250 Super Duty |
| 2017-2019 | Ford F-350 Super Duty |
This item is a package with the following components:
| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Front Lift Height | 8 |
| Front Lift Method | Coil Spring |
| GTIN | 00840416403152 |
| Hazardous Material Code | N |
| Installation Difficulty | difficult |
| Installation Time | 8-10 Hrs |
| Installation Tools | 30mm socket-Torque Wrench-cutOffTool-drill-jack hydraulic-puller pitmanArm-saw reciprocating |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Rear Lift Height | 6 |
| Rear Lift Method | Leaf Spring |
| SDR Required Flag | N |
| Shocks Included | Yes |