Take your Jeep XJ up a notch with this 2" lift kit from Zone Offroad. This kit includes everything needed from polyurethane coil spacers and bolt-in bump stop extensions to a rear add-a-leaf kit and u-bolts to level the stance. Get the look, performance, and capability your truck deserves with clearance for larger tires.
- Front 2" coil spring spacers raise lift height while retaining factory ride quality
- Front bump stop extensions to properly limit suspension up travel
- Rear long add-a-leafs, new center pins, clamps and replacement u-bolts are supplied to freshen up the rear while leveling the stance
Information:
Check Rear Axle Diameter: The XJ was manufactured with different rear axles. You’ll need to identify yours to complete an order. To tell the difference, measure the inner diameter (I.D.) of your rear U-bolts. The Chrysler 8.25 rear axle uses a 3" I.D. U-bolt and the Dana 35 rear axle requires a 2-3/4" I.D. U-bolt.
Application Summary:
| Year |
Make/Model |
| 1984-2001 |
Jeep Cherokee |
| Attributes |
| Accommodates Factory Wheels |
Yes |
| Adjustable |
No |
| Alternate Part Number |
ZONJ5 |
| Back Spacing |
4" |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Front Lift Height |
2" |
| Front Lift Method |
Coil Spring Spacers |
| Hazardous Material Code |
N |
| Installation Difficulty |
3 out of 5 |
| Installation Time |
4 hrs |
| Life Cycle Status Code |
Available to Order |
| Lift Type |
Lift Kit |
| Max Tire Size |
30 x 9.5 |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Height |
2" |
| Rear Lift Method |
Add-A-Leaf |
| Requires Metal Cutting |
No |
| Requires Welding |
No |
| SDR Required Flag |
N |
| Wheel Size |
15 x 7 |
| GTIN |
00810156367670 |
