87-95 Jeep YJ 2in Leaf Spring
This 4-leaf pack features anti-friction pads and center leaf spacer plates between each leaf to significantly decrease internal friction. The spring is designed to give 2" of lift for the front or rear of your YJ. Sold individually, bushings sold separately.
- 4-leaf design with military wrapped ends.
Uses center leaf spacer plates between each leaf and anti-friction pads for smooth, quiet operation.
Sold individually, bushings sold separately
Information:
Bushings NOT Included.
If installing 2" rear springs without any additional driveline modifications (ex: transfer case drop, SYE/CV driveshaft, motor mount lift) it is necessary to install 4 degree shims on the rear leaf springs to correct the rear driveline angle. See optional accessory section to add 4 degree shims and new center pin kit. (Shim Kit # U3001 - Center Pin Kit # U3010).
Part # J0200 is a single leaf spring - bushings are ubolts are not included. Choose from the selections below to build your complete leaf spring, bushing, and U-bolt package.
Application Summary:
| Year |
Make/Model |
| 1987-1995 |
Jeep Wrangler |
This item is a component of the following packages: ZONJ27, ZONJ27N
| Attributes |
| Alternate Part Number |
ZONJ0200 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Center Pin Size |
.313 |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Eye To Center Front |
21.5" |
| Eye To Center Rear |
21.5" |
| Eye To Eye |
43.00 |
| Free Height |
6.50 |
| Front Eye Diameter |
1.50 |
| GTIN |
00711745600157 |
| Hazardous Material Code |
N |
| Horizontal Position |
Front or Rear |
| Length |
N/A |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Number Of Leafs |
4 |
| Overload Spring |
No |
| Pin Size |
N/A |
| Rear Eye Diameter |
1.50 |
| SDR Required Flag |
N |
| Width |
2-1/2" |
