For use with wire rope only, up to 7/8.
When used properly, this multi-purpose snatch block can double the pulling power of a winch and change the pulling direction without risk of damaging the rope. Snatch blocks also reduce amp draw and winch overheating. Applicable working load limit (WLL) is dependent on application: 4:1 Safety Factor WLL: 24,000lb - per ASME B30.26 Standard (General rigging & lifting); 2:1 Safety Factor WLL: 48,000lb - per BS 7901 Standard (Vehicle recovery, not overhead). Minimum breaking strength: 96,000lb.
When used properly, this multi-purpose snatch block can double the pulling power of a winch and change the pulling direction without risk of damaging the rope. Snatch blocks also reduce amp draw and winch overheating. Applicable working load limit (WLL) is dependent on application: 4:1 Safety Factor WLL: 24,000lb - per ASME B30.26 Standard (General rigging & lifting); 2:1 Safety Factor WLL: 48,000lb - per BS 7901 Standard (Vehicle recovery, not overhead). Minimum breaking strength: 96,000lb.
- Reduces heat build up and amp draw
- Double the pulling power of any winch
- Change pull direction with out damaging rope
- Verify the correct WLL based on your application: 24,000lb WLL for general rigging and lifting
- 48,000lb WLL for vehicle recovery and non-overhead pulling.
| Attributes | |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Red |
| Compatibility | Winches With 30000s Pound Capacity |
| Country of Origin (Primary) | US |
| Finish | Powder Coated |
| Harmonized Tariff Code (Schedule B) | 8708992000 |
| Hazardous Material Code | N |
| Includes Grease Port | Yes |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
| Warranty Time | 12 |
| Weight Capacity (LB) | 60000 Pounds |
| GTIN | 00012748808589 |
