2018-2024 Jeep Wrangler

---

Flashcal+ for Wrangler JL also contains a huge amount of control on the vehicle's subsystems through its body control module (BCM) to enable existing circuits and add or delete features like a backup camera or blind spot detection. It can also disable functions such as your electronic steering pump to convert to hydraulic or the electric lockers to convert to aftermarket manual units when building a trail-ready rig. There are also numerous options for changing your vehicle's lighting settings like Daytime Running Light location, enabling or disabling halo lights, keeping your fog lights on with your DRLs, and much more!

• CRAWL Screen (illustration above) acts as a live and on-the-fly interface: Front and Rear Differential Lock, TPMS Adjust, Engine RPM idle up (CRAWL features vary by year and trim level of vehicle)
• DRL Location Selector: Fog, Fender, Running, High, Low, Turn, or No DRL
• DRL Dropout Disable, keeps DRL on when using turn signal
• Tire Size Wizard - Self-calibrates speedometer with your phone's GPS. No need to enter data manually, and you don't even have to get out of your Jeep. (You can still enter tire size by height the old-fashioned if you want.)
• Fog Lights Dropout Disable, for simultaneous use of high beams and fog lights
• Halo Lights Enable or Disable
• One Touch Lane Change Enable
• Dashboard boot up Splash Screen selection: Rubicon, Sahara, Sport
• Seat Belt Minder Disable, stops chime
• Disable or Enable Travel Link Weather Warning
• Lighting Config, allow optional installation of Standard or LED bulbs: Front Turn, Tail Lights, 3rd Brake Light
• Rock Lock- holds all 4 wheels with brakes for crawling
• Auto Start/Stop Disable- turns it off and keeps it off as long as the OBD-II dongle is left plugged in, even after shutting off and restarting vehicle
• Auxiliary Switches Enable, to add extra factory Aux switches* and control added electrical accessories
• Blind Spot Detection Disable, or Enable to add if not equipped*
• Live Data Monitoring with customizable gauge display, as well as reading and clearing trouble codes (CELs)
• Factory Fog Light Switch Enable, adds controls if not equipped*
• Towing Package Enable, adds controls if not originally equipped*
• Backup Camera Disable, or Enable adds if not originally equipped (2018-2020 JL Only) *
• Cargo Camera Disable or Enable adds if not originally equipped (2018-2020 JL Only) *
• Electronic Steering Pump Disable, for conversion to hydraulic system*
• Axle Lockers Disable Rear Only, OR Front and Rear for conversion to manual*
• Axle Gear Calibration: 2.73 – 5.38:1
• Axle Lock Rear OR Front and Rear w/ T-case in 4-Hi & 4-Low (CRAWL Screen, Rubicon Only)
• Enable/Disable Electronic Sway Bar where equipped
• Read/Clear Diagnostic Trouble Codes (DTCs)
• *Our devices reconfigure vehicle controls for this associated change, but additional OEM or aftermarket parts are required to complete the conversion.
• Service Options menu for home repairs: ABS Initialization, Brake Pedal Relearn, Cam/Crank Sync
• *It is not recommended to use Flashcal+ on a vehicle that has previously had tire size adjusted with a Tazer device
• Reset modules option for ABS (anti-lock brakes), BCM (body control module), TPMS (tire pressure monitoring), and IPC (instrument panel cluster) modules
• Bluetooth connection from wireless dongle to Android or iPhone, and no wires to run
• Engine idle up for winching, temporarily with CRAWL Screen, 500-2000 RPM
• Sway Bar Disconnect in 2Hi, up to 25 MPH (CRAWL Screen, Rubicon only)
• Tire Size Calibration by height: 26” – 40”
• Line Lock- holds brakes on front tires only
• Transfer Case Gear ratio calibration: 2.72 – 5.00:1
• TPMS Warning Threshold adjust: 22–56 psi.
• TPMS Disable, for aftermarket wheels and no sensors
• TPMS Off/On (Crawl Screen)
• Daytime Running Lights Operation: Always On, Selectable, or No DRL

---

Information:

Holley Performance Emission Code 7: This part is legal under the provisions of EPA s memorandum 1A. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board; in order to achieve 50-state compliance; is pending with CARB. Once testing is complete with California; and an E.O. number is issued; this product will be updated to 50-state legal status

---

Application Summary:

Year	Make/Model
2018-2024	Jeep Wrangler