SOFTRIDE REAR SPRG/2.5in. GM
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the cinch style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
Information:
Constructed As Progressive Multileaf Packs; Load Capacity Will Be Equal or Greater Than OE; Made With American Steel; Limited Lifetime WarrantyApplication Summary:
| Year | Make/Model |
|---|---|
| 1973-1974 | Chevrolet Blazer |
| 1987-1994 | Chevrolet Blazer |
| 1975-1986 | Chevrolet K10 |
| 1969-1974 | Chevrolet K10 Pickup |
| 1975-1986 | Chevrolet K20 |
| 1969-1974 | Chevrolet K20 Pickup |
| 1975-1986 | Chevrolet K5 Blazer |
| 1987 | Chevrolet V10 |
| 1987 | Chevrolet V20 |
| 1973-1991 | GMC Jimmy |
| 1975-1978 | GMC K15 |
| 1969-1974 | GMC K15/K1500 Pickup |
| 1979-1986 | GMC K1500 |
| 1975-1978 | GMC K25 |
| 1969-1974 | GMC K25/K2500 Pickup |
| 1979-1986 | GMC K2500 |
| 1987 | GMC V1500 |
| 1987 | GMC V2500 |
This item is a component of the following packages: C125BKS, C225AKS-M, C125AKS-H, C125AKS-N, C125AKS8, C125AKS8-N, C125BKS-B, C125AKS, C125AKS-B, C125AKS-M, C225AKS, C125BKS-M, C125AKS8-M, C225AKS-H, C225AKS-B, C125BKS-N, C125BKS-H, C125AKS8-B, C125AKS8-H, C225AKS-N
| Attributes | |
| ASIN | B000K0WME2 |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| GTIN | 00803696121345 |
| Harmonized Tariff Code (Schedule B) | 7320201000 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| Lift/Drop Height | 2 in. |
| Lift/Drop Height (in.) | 2 |
| NAFTA Preference Criterion Code | B |
| SDR Required Flag | N |
Skyjacker CR12S Softride Leaf Spring
Product Information
- Brand: Skyjacker
- Product Number: CR12S
- Availability: Call for Availability
This item is a component of the following packages: C125BKS, C225AKS-M, C125AKS-H, C125AKS-N, C125AKS8, C125AKS8-N, C125BKS-B, C125AKS, C125AKS-B, C125AKS-M, C225AKS, C125BKS-M, C125AKS8-M, C225AKS-H, C225AKS-B, C125BKS-N, C125BKS-H, C125AKS8-B, C125AKS8-H, C225AKS-N