Suspension Lift Kit; 2.5-3 in. Lift; Incl. Strut Extensions; Diff. Mounting Spacers; Skid Plate Spacers; Bump Stops; Lift Blocks; U-Bolts; Hardware;
Rough Countrys 2.5 in. - 3 in. Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33 in. tire. This kit now includes two sets of 0.25 in. spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8 in. of lift. Use both for a full 3 in. level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Countrys in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Countrys Lifetime Replacement Warranty.
Rough Countrys 2.5 in. - 3 in. Leveling Suspension Kit for Toyota Tundra is the most innovative way for you to level the front of your vehicle with the rear, allowing you to dial in the angle you desire. Featuring a set of front, upper strut extensions, this kit can accommodate up to a 33 in. tire. This kit now includes two sets of 0.25 in. spacer shims, which can be used in addition to the strut spacers to fine-tune your level angle. Each shim provides roughly 3/8 in. of lift. Use both for a full 3 in. level, or fewer to leave a little rake in the front end angle - this is specifically great for individuals who prefer a slight nose down look for an aggressive head-on view, or routinely pull trailers and haul items that would potentially draw the nose up from a full level stance. Designed by Rough Countrys in-house Research and Development team, these components are engineered for a precise fit and incorporate superbly with factory equipment. A set of skid plate spacers allow use of the stock skid plate, and all components are easily removable should the vehicle need to be returned to stock height. A set of differential spacers help maintain factory ride quality, promoting optimum angles for the front CV axle after lifting. 100 % bolt-on installation makes setup a breeze, and all components are protected by Rough Countrys Lifetime Replacement Warranty.
- Allows For Up To 33 in. Tires
- Levels Front Of The Vehicle w/The Rear
- Allows Factory Front Skid Plate To Be Used
- Adjustable
- Shim Plates Allow You To Fine Tune The Front Amount Of Lift
- Differential Spacers Maintain Proper Front CV Axle Angle
- No Strut Disassembly Or Strut Compressor Req. For Installation
- Increased Ground Clearance
- Maintains Factory Ride Quality
- 100 Pct. Simple Bolt-On Installation
- Truck Can Be Easily Returned To Stock
Information:
Manufacturer: Rough Country Suspension Systems; Part Number: 87000; Weight (Lbs): 23.77; Install Time (Hours): 3-4; Wheel Backspacing (Inches): Factory; Recommended Tire Size: 285/65Application Summary:
| Year | Make/Model |
|---|---|
| 2007-2021 | Toyota Tundra |
| Attributes | |
| California Proposition 65 | No |
| Country of Origin (Primary) | US |
| Front Components | Upper strut extensions, Differential mounting spacers, Skid plate spacers, Bump Stops, Hardware |
| Front Kit Componenets | Upper strut extensions, Differential mounting spacers, Skid plate spacers, Hardware |
| Front Kit Components | Upper strut extensions, Differential mounting spacers, Skid plate spacers, Hardware |
| GTIN | 00843030143589 |
| Harmonized Tariff Code (Schedule B) | 8708809900 |
| Hazardous Material Code | N |
| Install Time | 3-4 hours |
| Life Cycle Status Code | Available to Order |
| Lift/Drop Height | 2.5 in., 3 in. |
| NAFTA Preference Criterion Code | B |
| Rear Components | 1.5 in lift blocks, U-bolts, Hardware |
| Rear Kit Components | 1.5in Lift Blocks, U-Bolts, Hardware |
| SDR Required Flag | N |
| Tire, Wheel, and Offset Info | 305 65R18:Factory 18:5x150:-:- |
Rough Country 87000 Suspension Lift Kit
Product Information
- Brand: Rough Country
- Product Number: 87000
- Availability: 6 in stock at Main Warehouse
*Allow 2-3 business days to ship to your local H&H store. (In stock items only)
$149.95
Install with Alignment +$930.00
