CV Drive Shaft; Rear; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Incl. Flanges; Yokes; Hardware; Collapsed Length 22.875 in.; Extended Length 26.375 in.;
This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard in.off the shelf in. mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Good Choice To Eliminate Vibration Issues
- Incl. Brute Force Red Seals
- Incl. Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of Way Of The Transmission Oil Pan
Information:
Manufacturer: Rough Country Suspension Systems; Part Number: 5072.1; Weight (Lbs): 22.75; Install Time (Hours): 2-3
Application Summary:
| Year |
Make/Model |
| 2012-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| California Proposition 65 |
No |
| Country of Origin (Primary) |
CN |
| GTIN |
00843030110451 |
| Harmonized Tariff Code (Schedule B) |
8708996805 |
| Hazardous Material Code |
N |
| Horsepower Rating |
OEM |
| Install Time |
2-3 hours |
| Life Cycle Status Code |
Available to Order |
| Material |
OEM |
| NAFTA Preference Criterion Code |
B |
| Position |
Rear |
| SDR Required Flag |
N |
| Usage |
OEM |
