6'' Lift Kit 2019-2023 Ram 2500 W/ Falcon Shocks And Ring And Crossmember Standard Output Diesel Motor
ReadyLIFT is excited to announce PN: 49-19610, an all-new 4-corner coil spring 6" lift kit with Falcon 1.1 Monotube shocks for the 2019-2023 Ram 2500 HD trucks equipped with the Standard Output Cummins turbodiesel engine providing plenty of clearance for an aggressive 37x12.5 tire and up to -18 offset wheel with no rubbing; delivering a beefy, tough look. The 49-19610 is specifically designed for Ram Heavy Duty applications with proprietary front and rear coil springs, heavy-duty radius arm drop brackets, heavy-duty fabricated steel front and rear track bar brackets, forged dropped pitman arm, front/rear sway bar relocation brackets and bump stop extensions preventing over-compression of the new Falcon 1.1 Monotube front & rear shocks that are included in this premium kit. This kit includes a unique CNC-machined 6061-T6 billet Aluminum Driveline Indexing System (DIS) that re-clocks the transfer case aligning the front output shaft for improved driveline angles. Some Ram HD trucks can experience a slight vibration after lifting due to driveline angle sensitivity. ReadyLIFT 6" lift kit with the Drive Line Indexing System (DIS) addresses this condition by re-clocking [indexing] the transfer case and providing a stout heavy-duty steel cross member that accommodates the new T-case position, all resulting in a smooth driving experience on or off-road.
- Designed for Ram Heavy Duty applications
- Forged dropped pitman arm
- Front/rear sway bar relocation brackets
- Bump stop extensions
- Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
- Premium kit includes Falcon 1.1 Monotube front & rear shocks
- Only available for 2500 HD Standard Output Motor and 68RFE Transmission
- Note: Single Cab configuration not validated for fitment & drivability by ReadyLIFT
- Heavy Heavyduty radius arm drop brackets
- Heavy Heavyduty fabricated steel front and rear track bar brackets
- Prevents over Prevents overcompression of new Falcon 1.1 Monotube front & rear shocks
- Proprietary front and rear coil springs
- Heavyduty radius arm drop brackets
- Heavyduty fabricated steel front and rear track bar brackets
Application Summary:
| Year |
Make/Model |
| 2019-2022 |
Ram 2500 |
| Attributes |
| 17 Inch Wheel Max Backspacing |
4.8, 4.8 |
| 18 Inch Wheel Max Backspacing |
4.8, 4.8 |
| 20 Inch or Larger Wheel Max Backspacing |
4.8, 4.8 |
| Average Installation Time |
120, 120, 1.5 |
| Bushings Included |
No |
| California Proposition 65 |
WARNING: Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Fitment |
Direct Fitment, Direct Fitment |
| Front Lift Component |
Coil Spring, Coil Spring |
| Front Lift Height |
6 Inches, 6 Inches, 6 |
| Front Shocks |
Falcon 1.1 Monotube, Falcon 1.1 Monotube |
| Front or Rear |
Front and Rear, Front and Rear |
| GTIN |
00194933189700 |
| Harmonized Tariff Code (Schedule B) |
8708801600 |
| Hazardous Material Code |
N |
| Install Difficulty |
Difficult Requires Professional Installation, Difficult Requires Professional Installation |
| Installation Time |
5+ Hours, 5+ Hours |
| Life Cycle Status Code |
Available to Order |
| Lift Kit Category |
Big Lift, Big Lift |
| Lift/Drop Height |
6 in. |
| Max Tire Diameter Custom Fit |
37, 37 |
| Max Tire Diameter Sure Fit |
35, 35 |
| Max Tire Size |
37 Inch, 37 Inch |
| Maximum Lift |
6 |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Component |
Coil Spring, Coil Spring |
| Rear Lift Height |
6, 6, 4 Inches |
| Rear Shocks |
Falcon 1.1 Monotube, Falcon 1.1 Monotube |
| SDR Required Flag |
N |
| Shock Brand |
Falcoln, Falcoln |
| Shocks Included |
Yes |
