9" Lift Kit - GM Silverado / Sierra 1500 - 2014-2018 W/ Cast Steel Suspension
ReadyLIFT introduces a new 9-inch lift kit, the 44-3491, for 2014-2018 Chevy Silverado and GMC Sierra 1500 trucks, compatible with both standard and front MagneRide suspension systems. This kit, suitable for trucks with the factory Forged Steel front suspension, features new tubular upper control arms. It preserves the factory turning radius, minimally increases track width by less than 0.5" per side, and accommodates up to a 37" tire on a 9" wide wheel with -12 offset. The kit includes a "clam-shell" style lower strut extension that maintains the use of factory struts and avoids strut rotation. These brackets use TCT lower bushings for a precise pivot point, ensuring the factory ride quality. The new tubular upper control arms with TCT pivot bushings provide enhanced strength compared to OE stamped steel arms. The kit's front and rear cross members, as well as the full-width front skid plate, are made from robust 3/16" plate steel. It also features a 1/4-inch boxed plate steel differential drop brackets with double gusset and boxed center rib to handle front differential torsional twisting. The rear lift is achieved with a rear add-a-leaf spring and 3/16-inch thick plate steel rear lift blocks with built-in bump stop landings and an offset pin design to correctly center the axle. The lift blocks are angled to maintain proper pinion angle. Included are premium extended length Bilstein rear shocks. Note: Suitable for 2WD or 4WD models only, not AWD. It fits up to a 37" tall off-road tire with specified wheel dimensions. Minor trimming may be required for some aggressive tires. Not recommended for GMC Denali 1500 with REAR MagneRide or models with Rear MagneRide. Front MagneRide compatibility only. Comes with ReadyLIFT ReadyGuard Powertrain Warranty.
- Fits 20142016 GM 1500 trucks with OE Forged Steel front suspension
- Before purchasing What Control Arms Does Your Truck Have?
- Note: Single Cab configuration has not been validated for fitment & drivability by ReadyLIFT.
- Fits 2014 Fits 20142016 GM 1500 trucks with OE Forged Steel front suspension
- Before purchasing Before purchasing What Control Arms Does Your Truck Have?
- Allows for up to a 37" tall off road tire
- Requires at least a 9 inch wide wheel with 12 offset
- Retains factory turning radius, ride and handling
- Works with Front MagneRide
- Includes premium Bilstein shocks
- Includes new tubular steel upper control arms with TCT pivot bushings
Application Summary:
| Year |
Make/Model |
| 2014-2018 |
Chevrolet Silverado 1500 |
| 2014-2018 |
GMC Sierra 1500 |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Fitment |
Direct Fitment, Direct Fitment |
| Front Lift Component |
Spacer, Spacer |
| Front Lift Height |
9 Inches, 9 Inches |
| Front Shocks |
None, None |
| Front or Rear |
Front and Rear, Front and Rear |
| GTIN |
00804879579106 |
| Harmonized Tariff Code (Schedule B) |
8708801600 |
| Hazardous Material Code |
N |
| Install Difficulty |
Difficult Requires Professional Installation, Difficult Requires Professional Installation |
| Installation Time |
5+ Hours, 5+ Hours |
| Life Cycle Status Code |
Available to Order |
| Lift/Drop Height |
10 in. |
| Max Tire Size |
37 Inch, 37 Inch |
| NAFTA Preference Criterion Code |
B |
| Rear Lift Component |
Block and U-bolt with add a leafs, Block and U-bolt with add a leafs |
| Rear Lift Height |
9 Inches, 9 Inches |
| Rear Shocks |
Bilstein, Bilstein |
| SDR Required Flag |
N |
| Shocks Included |
Yes |
