ORACLE Lighting Jeep Wrangler JL/Gladiator JT 7in. High Powered LED Headlights (Pair) White Halos
Complete Package for adding High-Performance 7" LED Headlights to your Wrangler JL/Gladiator JT without any fabrication or cutting your factory wiring. This complete Plug-&-Play kit also features Vertical and Horizontal headlight adjustment so you can put the light on the road (where you need it) and not blind oncoming traffic. The Ultimate 7" LED replacement headlight option for the Wrangler JL/Gladiator JT. This rugged solid-state LED design is perfect for the Jeep owner looking for high-quality lighting for better night time visibility without overpaying. Installation is very easy with the included JL/JT-specific “Plug and Play” connectors. You can even choose optional colored Halos for even more customization! Note: DRL wire cannot be used as a power source - Tapping into Park Lights will give manual control over LED accessory during daytime driving - LED accessory will turn on automatically in night mode when switch is set to AUTO - For full automatic control over the LED accessory use fuse F52 in the engine compartment fuse panel.
- Premium Performance Phillips Luxeon ZES LEDs
- High Beam Lumens: 3600 Lumens/4800 Raw Lumens
- Improvements in brightness and reliability by adding a constant current LED driver to the main circuit board inside of the lamp to control the LED halos.
- Wide Beam Pattern with Sharp Cut-Off Line
- Easy Plug & Play Installation
- 2 Year Warranty
- DOT and SAE Certified
- Increased Reliability- By conditioning the power going into the LEDs this prevents degradation which can shorten the overall lifespan of the product.
- Wider Input Voltage Range- The new SMD Halos can operate on a very wide voltage range from 12V-24V so that voltage spikes can not damage the LEDs.
- Brighter/ More Even Light- by moving the heat load of the resistors off the PCB we are able to increase the number of LEDs on the circuit board without thermal issues.
- LED chips upgraded from a Cree LED to a Phillips Luxeon ZES chip.They deliver a very high efficacy 130LM/W ratio while having lower thermal output.
- Low Beam Wattage: 30W Normal/36W Max
- Color Temperature: 6000K (Cool White Color)
- Low Beam Lumens: 2200 Lumens/3600 Raw Lumens
- High Beam Wattage: 40W Normal/48W Max
- Input Voltage of Light: 12-24V DC
- Input Voltage of Halo (If Included): 12V DC
- Current Draw: 2.50 Amps @ 12V DC / 1.30 Amps @ 24V DC
- Optional: ORACLE Halo Rings Pre-Installed
- Die-Cast Housing with Corrosion Resistant Coating
- Heavy Duty Solid State Electronics
- Hard-coated Polycarbonate Lens
Information:
White
Application Summary:
| Year |
Make/Model |
| 2020-2025 |
Jeep Gladiator |
| 2018-2025 |
Jeep Wrangler |
| Attributes |
| Add-On |
N/A, N/A |
| Amp Draw |
2.50 Amps at 12V DC / 1.30 Amps at 24V DC, 2.50 Amps at 12V DC / 1.30 Amps at 24V DC |
| Amperage Rating |
2.5 |
| Average Rated Life |
60000 |
| Ballast Included |
No |
| Beam Type |
High Beam Low Beam |
| Bezel Color |
Black |
| Brightness |
3600 |
| Bulb Color |
6,000K |
| Bulb Quantity |
4 |
| Bulb Technology |
LED |
| Bulb Type |
H4/H13 |
| Bulbs Included |
Yes |
| California Proposition 65 |
WARNING: Cancer - www.P65Warnings.ca.gov |
| Color |
White |
| Color Temperature |
6000K |
| Contents |
(2x) ORACLE 7in. High Performance LED Headlights, (2x) Plug & Play Wiring Adapters, (2x) Direct-Fit Beam Adjustable Headlight Brackets, (2x) ORACLE 7in. High Performance LED Headlights, (2x) Plug & Play Wiring Adapters, (2x) Direct-Fit Beam Adjustable Headlight Brackets |
| Country of Origin (Primary) |
US |
| Department of Transportation Approved |
Yes |
| GTIN |
00810030390497 |
| Harmonized Tariff Code (Schedule B) |
8512200000 |
| Hazardous Material Code |
N |
| Headlight Type |
Sealed Beam |
| High Beam Lumens |
3600, 3600 |
| High Beam Wattage |
40W Normal/48W Max, 40W Normal/48W Max, 48 |
| Housing Color |
Black |
| Housing Material |
Cast Aluminum |
| Kelvin Temperature |
6000K, 6000K |
| LED Color |
White, White |
| Lens Color |
Clear |
| Lens Material |
PC (Polycarbonate) |
| Life Cycle Status Code |
Available to Order |
| Low Beam Lumens |
2200, 2200 |
| Low Beam Wattage |
30W Normal/36W Max, 30W Normal/36W Max |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Secondary Amperage Rating |
1.3 |
| Street Legal |
Yes |
| Terminal Type |
Blade |
| Voltage |
12-24V DC, 12-24V DC, 12 |
| Warranty |
2 Year, 2 Year |
| Warranty Time |
2 |
| Wattage |
48 |
