MagnaFlow HM Grade Universal Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99353HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99353HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Information:
Not legal for sale or installation in California, Colorado or New York.| Attributes | |
| Air Tube Adaptable | No |
| ASIN | B001HMJVAA |
| Body Height | 4 |
| Body Length | 11.000 in., 11 |
| Body Length (in.) | 11 |
| Body Material | Stainless Steel, Stainless Steel |
| Body Shape | Round, Round |
| Body Type | Clam Shell, Clam-Shell |
| Body Width | 4.250 in., 4.25 |
| Body Width (in.) | 4.25 |
| California Air Board Approved | No |
| California Air Resources Board (CARB) | No |
| California Air Resources Board (CARB) Certified | No |
| California Proposition 65 | No |
| CARB Executive Order Number | Not Applicable, Not Applicable |
| CAT Converter Air Tube Adapter | Not Air Tube Kit Adaptable |
| Catalytic Converter Air Tube Adapter | Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material | Stainless |
| Catalytic Converter Format | Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length | 15 |
| Catalytic Converter Oxygen Sensor Location | Midbed |
| Clamps Included | No |
| Converter Body Size | OEM |
| Core Substrate Material | Ceramic |
| Country of Origin (Primary) | US |
| Emission | Non-California (49-State) |
| Emission Code | Not in CA |
| Finish | Stainless |
| Grade Type | Regular |
| Hangers Included | No |
| Harmonized Tariff Code (Schedule B) | 8421320000 |
| Hazardous Material Code | N |
| Heat Shield Attached | Yes |
| Heat Shield Included | Yes |
| Inlet Attachment | Weld-On |
| Inlet Attachment Type | Weld-On |
| Inlet Diameter | 1.750 in. |
| Inlet Gasket Included | No |
| Inlet Inside Diameter | 1.750 in., 1.75 |
| Inlet Inside Diameter (in.) | 1.75 |
| Inlet Mounting Hardware Included | No |
| Inlet Quantity | 1 |
| Inlet Size (in.) | 1.75 |
| Inlet Type | Weld-On, Weld-On |
| Life Cycle Status Code | Available to Order |
| Main Piping Diameter | 1.750 in. |
| Main Piping Diameter (in.) | 1.75 |
| Material | Stainless, Stainless Steel |
| NAFTA Preference Criterion Code | B |
| New York Certified | No |
| Outlet Attachment | Weld-On |
| Outlet Attachment Type | Weld-On |
| Outlet Diameter | 1.750 in. |
| Outlet Gasket Included | No, No |
| Outlet Inside Diameter | 1.75, 1.75 |
| Outlet Mounting Hardware Included | No, No |
| Outlet Outside Diameter | 1.750 in. |
| Outlet Outside Diameter (in.) | 1.75 |
| Outlet Quantity | 1, 1 |
| Outlet Size (in.) | 1.75 |
| Outlet Type | Weld-On, Weld-On |
| Overall Length | 15.000 in., 15 |
| Overall Length (in.) | 15.000 in. |
| Oversize Shipping | 841380031303 |
| Oxygen Sensor Location | Midbed |
| Recommended Use | Converter |
| SDR Required Flag | N |
| Sensor Port Count | 1, 1 |
| Series | HM Grade, HM Grade |
| Substrate Material | Ceramic, Ceramic |
| Subtitle | Federal / EPA Compliant |
| Subtitles | Federal / EPA Compliant |
| Tube Material | Stainless Steel, Stainless Steel |
| Type | Universal |
| Universal of Specific Fit | Universal |
| Universal Or Specific Fit | Universal, Universal |
| Warranty Time | 5 |
| GTIN | 00841380031303 |
