Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93146. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2001-2003 Saturn L200, 2001-2002 Saturn L100, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
Year |
Make/Model |
2001-2002 |
Saturn L100 |
2001-2003 |
Saturn L200 |
2004 |
Saturn L300 |
2001-2003 |
Saturn LW200 |
Attributes |
ASIN |
B001O02LUW |
Air Tube Adaptable |
No |
Anticipated Ship Out Time |
Approximately 1-2 Days |
Body Length |
9.000 in. |
Body Length (in.) |
9 |
Body Material |
Stainless Steel |
Body Width |
5.000 in. |
Body Width (in.) |
5 |
CARB Compliant |
No |
CARB Executive Order Number |
Not Applicable |
CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
CAT Converter Configuration |
Direct-Fit |
California Air Board Approved |
No |
California Air Resources Board (CARB) |
No |
California Proposition 65 |
No |
Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
Catalytic Converter Body Material |
Stainless |
Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
Catalytic Converter Overall Length |
40 |
Catalytic Converter Oxygen Sensor Location |
Pre and Post Converter |
Components |
Gasket=2 |
Converter Body Size |
OEM |
Converter Quantity |
1 |
Core Substrate Material |
Ceramic |
Country of Origin (Primary) |
US |
Emission |
Non-California (49-State) |
Emission Code |
Not in CA |
Exhaust Component Mount Type |
Uses Factory Hangers |
Exhaust Pipe Material |
Stainless Steel |
Finish |
Stainless Steel |
GTIN |
00841380034397 |
Gasket Or Seal Included |
Yes |
Harmonized Tariff Code (Schedule B) |
8421320000 |
Hazardous Material Code |
N |
Inlet Attachment |
Bolt-On |
Inlet Attachment Type |
Bolt-On |
Inlet Inside Diameter |
2.000 in. |
Inlet Inside Diameter (in.) |
2 |
Inlet Size (in.) |
2 |
Inlet Type |
Bolt-On |
Life Cycle Status Code |
Available to Order |
Main Piping Diameter |
2.000 in. |
Main Piping Diameter (in.) |
2 |
Material |
Stainless Steel |
Mounting Hardware Included |
Yes |
NAFTA Preference Criterion Code |
B |
Outlet Outside Diameter |
2.000 in. |
Outlet Outside Diameter (in.) |
2 |
Outlet Quantity |
1 |
Outlet Size (in.) |
2 |
Overall Length |
40.000 in. |
Overall Length (in.) |
40.000 in. |
Oversize Shipping |
841380034397 |
Oxygen Sensor Location |
Pre and Post Converter |
Recommended Use |
Converter |
SDR Required Flag |
N |
Series |
HM Grade |
Subtitle |
Federal / EPA Compliant |
Subtitles |
Federal / EPA Compliant |
Type |
Direct-Fit |
Universal Or Specific Fit |
Specific |
Warranty Time |
5 |