MagnaFlow OEM Grade Diesel Oxidation Catalyst
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Diesel Oxidation Catalyst 60504. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 60504 includes (4) Bolts, (1) Flange Gasket. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant diesel oxidation catalysts, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Durable 308 stainless steel MIG welds
- Simplifies installation with essential gaskets and hardware being included in the box
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 2007-2010 |
Chevrolet Silverado 2500 HD |
| 2007-2010 |
Chevrolet Silverado 3500 HD |
| 2007-2010 |
GMC Sierra 2500 HD |
| 2007-2010 |
GMC Sierra 3500 HD |
| Attributes |
| ASIN |
B01MDU2GGI |
| Body Height |
6.000 in., 6 |
| Body Height (in.) |
6 |
| Body Length |
12.000 in., 12 |
| Body Length (in.) |
12 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Width |
6.000 in., 6 |
| Body Width (in.) |
6 |
| California Air Board Approved |
No |
| California Proposition 65 |
No |
| CARB Compliant |
No |
| CARB Executive Order Number |
Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Air Tube Adapter |
No |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Clamp Included |
No, No |
| Converter Body Size |
OEM |
| Converter Quantity |
1, 1 |
| Core Substrate Material |
Metallic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Grade Type |
Regular, Regular |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Attachment |
Clamp-On, Clamp-On |
| Inlet Gasket Included |
No, No |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Mounting Hardware Included |
No, No |
| Inlet Outside Diameter |
3.000 in. |
| Inlet Outside Diameter (in.) |
3 |
| Inlet Quantity |
1, 1 |
| Inlet Size (in.) |
3 |
| Inlet Type |
Slip-Fit, Slip-Fit |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| Meet/Exceed OEM Specifications |
Yes |
| Meets or Exceeds Original Equipment Manufacture Specifications |
Yes |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| New Or Remanufactured |
New |
| Outlet Attachment |
Bolt-On, Bolt-On |
| Outlet Gasket Included |
Yes, Yes |
| Outlet Mounting Hardware Included |
Yes, Yes |
| Outlet Outside Diameter |
3.500 in. |
| Outlet Outside Diameter (in.) |
3.5 |
| Outlet Quantity |
1, 1 |
| Outlet Size (in.) |
3.5 |
| Outlet Type |
Welded Flange, Welded Flange |
| Overall Length |
12.000 in., 44.5 |
| Overall Length (in.) |
12.000 in. |
| Oversize Shipping |
888563064086 |
| SDR Required Flag |
N |
| Series |
OEM Grade, OEM Grade |
| Substrate Material |
Metallic, Metallic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel, Stainless Steel |
| Type |
Direct-Fit |
| Universal |
No |
| Universal Or Specific Fit |
Direct-Fit |
| Warranty Time |
5 |
| GTIN |
00888563064086 |
