MagnaFlow OEM Grade Diesel Oxidation Catalyst
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Diesel Oxidation Catalyst 60503. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Diesel Oxidation Catalyst is designed to fit the 2008-2010 Ford F-250 Super Duty 6.4L & 2008-2010 Ford F-350 Super Duty 6.4L. MagnaFlow 60503 includes (2) Nuts, (1) Flange Gasket, (2) Bolts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
- Your trusted source for EPA-compliant diesel oxidation catalysts, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 2008-2010 |
Ford F-250 Super Duty |
| 2008-2010 |
Ford F-350 Super Duty |
| Attributes |
| ASIN |
B01LZWU4AI |
| Body Height |
6.000 in., 6 |
| Body Height (in.) |
6 |
| Body Length |
12.750 in., 12.75 |
| Body Length (in.) |
12.75 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Width |
6.000 in., 6 |
| Body Width (in.) |
6 |
| California Air Board Approved |
No |
| California Proposition 65 |
No |
| CARB Compliant |
No |
| CARB Executive Order Number |
Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| CAT Converter Configuration |
Direct-Fit |
| Catalytic Converter Air Tube Adapter |
No |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Clamp Included |
No, No |
| Converter Body Size |
OEM |
| Converter Quantity |
1, 1 |
| Core Substrate Material |
Metallic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Grade Type |
Regular, Regular |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Attachment |
Bolt-On, Bolt-On |
| Inlet Gasket Included |
No, No |
| Inlet Inside Diameter |
3.500 in. |
| Inlet Inside Diameter (in.) |
3.5 |
| Inlet Mounting Hardware Included |
No, No |
| Inlet Outside Diameter |
3.000 in. |
| Inlet Outside Diameter (in.) |
3.5 |
| Inlet Quantity |
1, 1 |
| Inlet Size (in.) |
3.5 |
| Inlet Type |
Welded Flange, Welded Flange |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| Meet/Exceed OEM Specifications |
Yes |
| Meets or Exceeds Original Equipment Manufacture Specifications |
Yes |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| New Or Remanufactured |
New |
| Outlet Attachment |
Bolt-On, Bolt-On |
| Outlet Gasket Included |
Yes, Yes |
| Outlet Mounting Hardware Included |
No, No |
| Outlet Outside Diameter |
3.500 in. |
| Outlet Outside Diameter (in.) |
6 |
| Outlet Quantity |
1, 1 |
| Outlet Size (in.) |
6 |
| Outlet Type |
Flare With Loose Flange, Flare With Loose Flange |
| Overall Length |
12.750 in., 37.75 |
| Overall Length (in.) |
12.750 in. |
| Oversize Shipping |
888563064123 |
| SDR Required Flag |
N |
| Sensor Port Count |
3, 3 |
| Series |
OEM Grade, OEM Grade |
| Substrate Material |
Metallic, Metallic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel, Stainless Steel |
| Type |
Direct-Fit |
| Universal |
No |
| Universal Or Specific Fit |
Direct-Fit |
| Warranty Time |
5 |
| GTIN |
00888563064123 |
