MagnaFlow OEM Grade Diesel Oxidation Catalyst
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Diesel Oxidation Catalyst 60112. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Your trusted source for EPA-compliant Diesel Oxidation Catalysts, providing assurance of genuine compliance while delivering quality that will last
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 2007 |
Dodge Ram 2500 |
| 1994-1996 |
Dodge Ram 3500 |
| 2007 |
Dodge Ram 3500 |
| 1999 |
Ford F-250 Super Duty |
| 1999 |
Ford F-350 Super Duty |
| Attributes |
| Air Tube Adaptable |
No |
| ASIN |
B009V17IOA |
| Body Height |
6.000 in., 6 |
| Body Length |
12.000 in., 12 |
| Body Length (in.) |
12 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Shape |
Round, Round |
| Body Type |
Spun, Spun |
| Body Width |
6.000 in., 6 |
| Body Width (in.) |
6 |
| California Air Board Approved |
No |
| California Air Resources Board (CARB) |
No |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
No |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length |
12 |
| Catalytic Converter Oxygen Sensor Location |
N/A |
| Clamps Included |
No |
| Converter Body Size |
OEM |
| Core Substrate Material |
Metallic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Finish |
Stainless Steel, Stainless Steel |
| Grade Type |
Regular |
| Hangers Included |
No |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No, No |
| Inlet Attachment |
Weld-On |
| Inlet Attachment Type |
Weld-On |
| Inlet Diameter |
5.000 in. |
| Inlet Gasket Included |
No |
| Inlet Inside Diameter |
5.000 in., 5 |
| Inlet Inside Diameter (in.) |
5 |
| Inlet Mounting Hardware Included |
No |
| Inlet Orientation |
Straight |
| Inlet Quantity |
1, 1 |
| Inlet Size (in.) |
5 |
| Inlet Type |
Weld-On, Weld-On |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment |
Weld-On |
| Outlet Attachment Type |
Weld-On |
| Outlet Diameter |
5.000 in. |
| Outlet Gasket Included |
No |
| Outlet Inside Diameter |
5, 5 |
| Outlet Mounting Hardware Included |
No |
| Outlet Orientation |
Straight, Straight |
| Outlet Outside Diameter |
5.000 in. |
| Outlet Outside Diameter (in.) |
5 |
| Outlet Quantity |
1, 1 |
| Outlet Size (in.) |
5 |
| Outlet Type |
Weld-On, Weld-On |
| Overall Length |
12.000 in., 12 |
| Overall Length (in.) |
12.000 in. |
| Oversize Shipping |
841380080196 |
| Oxygen Sensor Location |
None |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Series |
HM Grade, OEM Grade |
| Substrate Material |
Metallic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel |
| Type |
Universal |
| Universal Or Specific Fit |
Universal, Universal |
| Warranty Time |
5 |
| GTIN |
00841380080196 |
