Magnaflow California Manifold Catalytic Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Manifold Catalytic Converter 5582893. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5582893 includes (1) O2 Port Plug, (4) Nuts, (1) Flat Washer, (1) Flange Gasket, (4) Bolts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Simplifies installation with essential gaskets and hardware being included in the box
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Information:
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.
Application Summary:
| Year |
Make/Model |
| 2010-2013 |
Acura MDX |
| 2013-2015 |
Acura RDX |
| 2008-2016 |
Honda Odyssey |
| 2009-2015 |
Honda Pilot |
| 2009-2014 |
Honda Ridgeline |
| Attributes |
| Air Tube Adaptable |
No |
| Body Length |
7.375 in. |
| Body Type |
Spun |
| Body Width |
5.000 in. |
| California Air Resources Board (CARB) Certified |
Yes |
| California Proposition 65 |
No |
| CARB Executive Order Number |
D-193-148, D-193-148 |
| Catalytic Converter Air Tube Adapter |
No |
| Clamps Included |
No, No |
| Converter Body Length |
6.25 |
| Converter Body Material |
Stainless Steel |
| Converter Quantity |
1 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Finish |
Stainless Steel, Stainless Steel |
| Gasket Or Seal Included |
Yes |
| Grade Type |
Regular |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Inlet Attachment Type |
Bolt-On |
| Inlet Diameter |
3.125 in. |
| Inlet Gasket Included |
Yes |
| Inlet Inside Diameter |
3.125 in. |
| Inlet Mounting Hardware Included |
No |
| Inlet Quantity |
1 |
| Inlet Type |
Flange |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.000 in. |
| Material |
Stainless Steel, Stainless Steel |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| New York Certified |
No |
| Outlet Attachment Type |
Bolt-On |
| Outlet Diameter |
2.000 in. |
| Outlet Gasket Included |
No, No |
| Outlet Mounting Hardware Included |
Yes, Yes |
| Outlet Outside Diameter |
2.000 in. |
| Outlet Quantity |
1 |
| Outlet Type |
Flanged, Flanged |
| Overall Length |
14.500 in., 14.5 |
| Oxygen Sensor Location |
Pre and Post Converter |
| SDR Required Flag |
N |
| Sensor Port Count |
2, 2 |
| Series |
California, California |
| Substrate Material |
Ceramic, Ceramic |
| Subtitles |
California / CARB Compliant |
| Type |
Direct-Fit, One-Piece |
| Universal of Specific Fit |
Specific |
| Warranty Time |
5 |
| GTIN |
00888563157313 |
