Magnaflow California Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 557107. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2014-2015 Chevrolet Impala Limited 3.6L & 2012-2013 Chevrolet Impala 3.6L. MagnaFlow 557107 includes (1) Torca Clamp, (1) Flange Gasket, (2) Bolts, (2) Nuts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Information:
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.
Application Summary:
| Year |
Make/Model |
| 2012-2013 |
Chevrolet Impala |
| 2014-2015 |
Chevrolet Impala Limited |
| Attributes |
| Air Tube Adaptable |
No |
| Anticipated Ship Out Time |
Approximately 1-2 Days |
| Body Length |
9.000 in. |
| Body Length (in.) |
9 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Type |
Spun |
| Body Width |
4.000 in. |
| Body Width (in.) |
4 |
| California Air Board Approved |
Yes |
| California Air Resources Board (CARB) |
Yes |
| California Air Resources Board (CARB) Certified |
Yes |
| California Proposition 65 |
No |
| CARB Executive Order Number |
D-193-133, D-193-133 |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length |
19.875 |
| Catalytic Converter Oxygen Sensor Location |
N/A |
| Clamps Included |
Yes, Yes |
| Converter Body Size |
4.000 in. |
| Converter Quantity |
1 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission Code |
Legal US |
| Exhaust Component Mount Type |
Uses Factory Hangers |
| Exhaust Inlet Connection Type |
Bolt-On |
| Exhaust Outlet Connection Type |
Clamp-On |
| Exhaust Pipe Material |
Stainless Steel |
| Finish |
Stainless Steel, Stainless Steel |
| Grade Type |
Regular |
| Hangers Included |
No |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Inlet Attachment |
Bolt-On |
| Inlet Attachment Type |
Bolt-On |
| Inlet Connection Type |
Bolt-On |
| Inlet Gasket Included |
Yes |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Mounting Hardware Included |
Yes |
| Inlet Type |
Bolt-On, Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.500 in. |
| Main Piping Diameter (in.) |
2.5 |
| Material |
Stainless Steel, Stainless Steel |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| New York Certified |
Yes |
| Outlet Attachment |
Clamp-On |
| Outlet Attachment Type |
Clamp-On |
| Outlet Connection Type |
Clamp-On |
| Outlet Gasket Included |
No, No |
| Outlet Mounting Hardware Included |
Yes, Yes |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Type |
Clamp-On, Clamp-On |
| Overall Length |
19.875 in., 20 |
| Overall Length (in.) |
19.875 in. |
| Oversize Shipping |
888563072944 |
| Oxygen Sensor Location |
None |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Series |
California, California |
| Substrate Material |
Ceramic, Ceramic |
| Subtitle |
California / CARB Compliant |
| Subtitles |
California / CARB Compliant |
| Tube Material |
Stainless Steel, Stainless Steel |
| Type |
Direct-Fit |
| Universal of Specific Fit |
Specific |
| Universal Or Specific Fit |
Specific, Specific |
| Warranty Time |
5 |
| GTIN |
00888563072944 |
