Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52756. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2016-2022 Honda Pilot, 2014-2020 Acura MDX, and more, this direct-fit catalytic converter also interchanges with OE parts 18150-5MJ-A50 and 18150-RLV-A50, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 2014-2020 |
Acura MDX |
| 2019-2023 |
Honda Passport |
| 2016-2022 |
Honda Pilot |
| 2017-2023 |
Honda Ridgeline |
| Attributes |
| Body Height |
5.000 in., 5 |
| Body Length |
6.250 in., 6.25 |
| Body Material |
Stainless Steel |
| Body Shape |
Round, Round |
| Body Type |
Spun |
| Body Width |
5.000 in., 5 |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
No |
| Catalytic Converter Air Tube Adapter |
No |
| Clamps Included |
No |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission Code |
Not in CA |
| Finish |
Stainless Steel |
| GTIN |
00888563154411 |
| Grade Type |
Regular |
| Hangers Included |
Yes |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Inlet Attachment Type |
Bolt-On |
| Inlet Gasket Included |
Yes |
| Inlet Inside Diameter |
2.000 in., 2 |
| Inlet Mounting Hardware Included |
No |
| Inlet Quantity |
2 |
| Inlet Type |
Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.250 in. |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Gasket Included |
No |
| Outlet Inside Diameter |
2.25 |
| Outlet Mounting Hardware Included |
Yes |
| Outlet Outside Diameter |
2.250 in. |
| Outlet Quantity |
1 |
| Outlet Type |
Bolt-On |
| Overall Length |
52.375 |
| SDR Required Flag |
N |
| Series |
OEM Grade, OEM Grade |
| Shape |
Round |
| Substrate Material |
Ceramic |
| Tube Material |
Stainless Steel |
| Type |
Direct-Fit |
| Universal Or Specific Fit |
Specific |
| Warranty Time |
5 |
