Magnaflow OEM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51924. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2012-2019 Hyundai Accent, 2012-2020 Kia Rio, and more, this direct-fit catalytic converter also interchanges with OE parts 28600-1R220 and 28600-1W850, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
- Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 2012-2019 |
Hyundai Accent |
| 2012-2017 |
Hyundai Veloster |
| 2012-2020 |
Kia Rio |
| 2012-2013 |
Kia Soul |
| Attributes |
| ASIN |
B01LJINETU |
| Air Tube Adaptable |
No |
| Anticipated Ship Out Time |
Approximately 1-2 Days |
| Body Length |
7.500 in. |
| Body Length (in.) |
7.5 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Type |
Spun |
| Body Width |
4.000 in. |
| Body Width (in.) |
4 |
| CARB Compliant |
No |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| California Air Board Approved |
No |
| California Air Resources Board (CARB) |
No |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
No |
| Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length |
16.375 |
| Catalytic Converter Oxygen Sensor Location |
N/A |
| Clamps Included |
Yes, Yes |
| Converter Body Size |
OEM |
| Converter Quantity |
1 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Exhaust Component Mount Type |
Uses Factory Hangers |
| Exhaust Inlet Connection Type |
Bolt-On |
| Exhaust Outlet Connection Type |
Clamp-On |
| Exhaust Pipe Material |
Stainless Steel |
| Finish |
Stainless Steel, Stainless Steel |
| GTIN |
00888563064376 |
| Grade Type |
Regular |
| Hangers Included |
No |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No, No |
| Inlet Attachment |
Bolt-On |
| Inlet Attachment Type |
Bolt-On |
| Inlet Connection Type |
Bolt-On |
| Inlet Gasket Included |
No |
| Inlet Inside Diameter |
2.250 in. |
| Inlet Inside Diameter (in.) |
2.25 |
| Inlet Mounting Hardware Included |
No |
| Inlet Size (in.) |
2.25 |
| Inlet Type |
Bolt-On, Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.250 in. |
| Main Piping Diameter (in.) |
2.25 |
| Material |
Stainless Steel |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment |
Clamp-On |
| Outlet Attachment Type |
Clamp-On |
| Outlet Connection Type |
Clamp-On |
| Outlet Gasket Included |
No |
| Outlet Mounting Hardware Included |
Yes |
| Outlet Outside Diameter |
2.000 in. |
| Outlet Outside Diameter (in.) |
2 |
| Outlet Quantity |
1 |
| Outlet Size (in.) |
2 |
| Outlet Type |
Clamp-On, Clamp-On |
| Overall Length |
17.750 in., 17.75 |
| Overall Length (in.) |
16.375 in. |
| Oversize Shipping |
888563064376 |
| Oxygen Sensor Location |
None |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Series |
OEM Grade, OEM Grade |
| Substrate Material |
Ceramic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel |
| Type |
Direct-Fit |
| Universal Or Specific Fit |
Specific, Specific |
| Warranty Time |
5 |
