Magnaflow HM Grade Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50205. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 1993-1997 Dodge Intrepid, 1993-1997 Chrysler Concorde, and more, this direct-fit catalytic converter also interchanges with OE parts 4616275 and 4764479, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 1993-1997 |
Chrysler Concorde |
| 1994-1997 |
Chrysler LHS |
| 1994-1996 |
Chrysler New Yorker |
| 1993-1997 |
Dodge Intrepid |
| 1993-1997 |
Eagle Vision |
| Attributes |
| ASIN |
B000RDLB1M |
| Air Tube Adaptable |
No |
| Anticipated Ship Out Time |
Approximately 1-2 Days |
| Body Length |
5.000 in. |
| Body Length (in.) |
5 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Type |
Spun |
| Body Width |
4.000 in. |
| Body Width (in.) |
4 |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| California Air Board Approved |
No |
| California Air Resources Board (CARB) |
No |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
No |
| Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length |
32.75 |
| Catalytic Converter Oxygen Sensor Location |
Post Converter |
| Clamps Included |
No |
| Converter Body Size |
OEM |
| Converter Quantity |
1 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Exhaust Component Mount Type |
Uses Factory Hangers |
| Exhaust Inlet Connection Type |
Bolt-On |
| Exhaust Outlet Connection Type |
Clamp-On |
| Exhaust Pipe Material |
Stainless Steel |
| Finish |
Stainless Steel, Stainless Steel |
| GTIN |
00841380017307 |
| Grade Type |
Regular |
| Hangers Included |
Yes |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Inlet Attachment |
Bolt-On |
| Inlet Attachment Type |
Bolt-On |
| Inlet Connection Type |
Bolt-On |
| Inlet Gasket Included |
No |
| Inlet Inside Diameter |
2.000 in. |
| Inlet Inside Diameter (in.) |
2 |
| Inlet Mounting Hardware Included |
No |
| Inlet Size (in.) |
2 |
| Inlet Type |
Bolt-On, Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.000 in. |
| Main Piping Diameter (in.) |
2 |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment |
Clamp-On |
| Outlet Attachment Type |
Clamp-On |
| Outlet Connection Type |
Clamp-On |
| Outlet Gasket Included |
No |
| Outlet Mounting Hardware Included |
No |
| Outlet Outside Diameter |
2.000 in. |
| Outlet Outside Diameter (in.) |
2 |
| Outlet Quantity |
1 |
| Outlet Size (in.) |
2 |
| Outlet Type |
Clamp-On, Clamp-On |
| Overall Length |
32.750 in., 32.75 |
| Overall Length (in.) |
32.750 in. |
| Oversize Shipping |
841380017307 |
| Oxygen Sensor Location |
Post Converter |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Sensor Port Count |
1 |
| Series |
HM Grade, HM Grade |
| Substrate Material |
Ceramic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel |
| Type |
Direct-Fit |
| Universal Or Specific Fit |
Specific, Specific |
| Warranty Time |
5 |
