Magnaflow California Direct-Fit Catalytic Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 334307. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 334307 interchanges with OE parts F4TZ-5F250-D. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Information:
Legal For Sale In All 50 States Including California, Colorado, New York and Maine. Installation is permitted only if the vehicle’s Executive Order number and Engine Family Number appear in this converter’s CARB Executive Order.
Application Summary:
| Year |
Make/Model |
| 1985-1995 |
Ford Bronco |
| 1985-1995 |
Ford F-150 |
| 1985 |
Ford F-250 |
| 1987-1995 |
Ford F-250 |
| Attributes |
| Air Tube Adaptable |
Yes |
| Air Tube Count |
1 |
| Anticipated Ship Out Time |
Approximately 1-2 Days |
| ASIN |
B00BF2YBHU |
| Body Length |
8.000 in. |
| Body Length (in.) |
8 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Type |
Clam-Shell |
| Body Width |
6.000 in. |
| Body Width (in.) |
6 |
| California Air Board Approved |
Yes |
| California Air Resources Board (CARB) |
Yes |
| California Air Resources Board (CARB) Certified |
Yes |
| California Proposition 65 |
No |
| CARB Compliant |
Yes |
| CARB Executive Order Number |
D-193-161 |
| CAT Converter Air Tube Adapter |
Air Tube Pre-Installed |
| Catalytic Converter Air Tube Adapter |
Air Tube Pre-Installed |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length |
52.25 |
| Catalytic Converter Oxygen Sensor Location |
Pre Converter |
| Clamps Included |
No |
| Converter Body Size |
OEM |
| Converter Quantity |
2 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission |
California |
| Emission Code |
Legal US |
| Exhaust Component Mount Type |
Uses Factory Hangers |
| Exhaust Pipe Material |
Stainless Steel |
| Finish |
Stainless Steel, Stainless Steel |
| Grade Type |
Regular |
| Hangers Included |
Yes |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
Yes |
| Heat Shield Included |
Yes |
| Inlet Attachment |
Bolt-On |
| Inlet Attachment Type |
Bolt-On |
| Inlet Gasket Included |
No |
| Inlet Inside Diameter |
2.000 in. |
| Inlet Inside Diameter (in.) |
2 |
| Inlet Mounting Hardware Included |
No |
| Inlet Size (in.) |
2 |
| Inlet Type |
Bolt-On, Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.500 in. |
| Main Piping Diameter (in.) |
2.5 |
| Material |
Stainless Steel, Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| New York Certified |
Yes |
| Outlet Gasket Included |
No, No |
| Outlet Mounting Hardware Included |
No, No |
| Outlet Outside Diameter |
2.250 in. |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Size (in.) |
2.25 |
| Outlet Type |
Weld-On, Weld-On |
| Overall Length |
52.250 in., 52.25 |
| Overall Length (in.) |
52.250 in. |
| Oversize Shipping |
841380085542 |
| Oxygen Sensor Location |
Pre Converter |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Sensor Port Count |
5, 5 |
| Series |
California, California |
| Substrate Material |
Ceramic, Ceramic |
| Subtitle |
California / CARB Compliant |
| Subtitles |
California / CARB Compliant |
| Tube Material |
Stainless Steel, Stainless Steel |
| Type |
Direct-Fit |
| Universal of Specific Fit |
Specific |
| Universal Or Specific Fit |
Specific, Specific |
| Warranty Time |
5 |
| GTIN |
00841380085542 |
