Magnaflow Standard Grade Direct-Fit Catalytic Converter
MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23633 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1993-1994 Volvo 850. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 1993-1994 |
Volvo 850 |
| Attributes |
| ASIN |
B0046JAG6Y |
| Air Tube Adaptable |
No |
| Anticipated Ship Out Time |
Approximately 1-2 Days |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Type |
Clam-Shell |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| California Air Board Approved |
No |
| California Air Resources Board (CARB) |
No |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
No |
| Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Overall Length |
44.25 |
| Clamps Included |
No |
| Converter Body Size |
OEM |
| Converter Quantity |
1 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Exhaust Pipe Material |
Stainless Steel |
| Finish |
Stainless Steel, Stainless Steel |
| GTIN |
00841380053169 |
| Grade Type |
Regular |
| Hangers Included |
No |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No |
| Inlet Attachment |
Bolt-On |
| Inlet Attachment Type |
Bolt-On |
| Inlet Gasket Included |
No |
| Inlet Inside Diameter |
OEM |
| Inlet Inside Diameter (in.) |
OE |
| Inlet Mounting Hardware Included |
Yes |
| Inlet Size (in.) |
OE |
| Inlet Type |
Bolt-On, Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter (in.) |
Stainless Steel |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Gasket Included |
No |
| Outlet Mounting Hardware Included |
No |
| Outlet Outside Diameter |
OEM |
| Outlet Outside Diameter (in.) |
OE |
| Outlet Size (in.) |
OE |
| Outlet Type |
Weld-On |
| Overall Length |
44.250 in., 44.25 |
| Overall Length (in.) |
44.250 in. |
| Oversize Shipping |
841380053169 |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Sensor Port Count |
2 |
| Series |
Standard Grade, Standard Grade |
| Substrate Material |
Ceramic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel |
| Type |
Direct-Fit |
| Universal Or Specific Fit |
Specific, Specific |
| Warranty Time |
5 |
