Magnaflow HM Grade Direct-Fit Catalytic Converter
MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23499 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1996-1998 Chevrolet Cavalier and 1996-1998 Pontiac Sunfire. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Information:
Not legal for sale or installation in California, Colorado or New York.
Application Summary:
| Year |
Make/Model |
| 1996-1998 |
Chevrolet Cavalier |
| 1996-1998 |
Pontiac Sunfire |
| Attributes |
| ASIN |
B000JKLDW0 |
| Air Tube Adaptable |
No |
| Anticipated Ship Out Time |
Approximately 1-2 Days |
| Body Length |
12.000 in. |
| Body Length (in.) |
12 |
| Body Material |
Stainless Steel, Stainless Steel |
| Body Type |
Clam-Shell |
| Body Width |
5.000 in. |
| Body Width (in.) |
5 |
| CARB Compliant |
No |
| CARB Executive Order Number |
Not Applicable, Not Applicable |
| CAT Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| CAT Converter Configuration |
Direct-Fit |
| California Air Board Approved |
No |
| California Air Resources Board (CARB) |
No |
| California Air Resources Board (CARB) Certified |
No |
| California Proposition 65 |
No |
| Catalytic Converter Air Tube Adapter |
Not Air Tube Kit Adaptable |
| Catalytic Converter Body Material |
Stainless |
| Catalytic Converter Format |
Pre-Catalytic Converter and Main Catalytic Converter |
| Catalytic Converter Overall Length |
19.5 |
| Catalytic Converter Oxygen Sensor Location |
Pre and Post Converter |
| Clamps Included |
No |
| Components |
Gasket=2 |
| Converter Body Size |
OEM |
| Converter Quantity |
1 |
| Core Substrate Material |
Ceramic |
| Country of Origin (Primary) |
US |
| Emission |
Non-California (49-State) |
| Emission Code |
Not in CA |
| Exhaust Component Mount Type |
Uses Factory Hangers |
| Exhaust Pipe Material |
Stainless Steel |
| Finish |
Stainless Steel, Stainless Steel |
| GTIN |
00841380008633 |
| Gasket Or Seal Included |
Yes |
| Grade Type |
Regular |
| Hangers Included |
No |
| Harmonized Tariff Code (Schedule B) |
8421320000 |
| Hazardous Material Code |
N |
| Heat Shield Attached |
No, No |
| Heat Shield Included |
Yes |
| Inlet Attachment |
Bolt-On |
| Inlet Attachment Type |
Bolt-On |
| Inlet Gasket Included |
Yes |
| Inlet Inside Diameter |
2.000 in. |
| Inlet Inside Diameter (in.) |
2 |
| Inlet Mounting Hardware Included |
No |
| Inlet Size (in.) |
2 |
| Inlet Type |
Bolt-On, Bolt-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2.000 in. |
| Main Piping Diameter (in.) |
2 |
| Material |
Stainless Steel |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Outlet Gasket Included |
Yes |
| Outlet Mounting Hardware Included |
No |
| Outlet Outside Diameter |
2.000 in. |
| Outlet Outside Diameter (in.) |
2 |
| Outlet Quantity |
1 |
| Outlet Size (in.) |
2 |
| Outlet Type |
Bolt-On |
| Overall Length |
19.500 in., 17 |
| Overall Length (in.) |
19.500 in. |
| Oversize Shipping |
841380008633 |
| Oxygen Sensor Location |
Pre and Post Converter |
| Recommended Use |
Converter |
| SDR Required Flag |
N |
| Sensor Port Count |
2 |
| Series |
HM Grade, HM Grade |
| Substrate Material |
Ceramic |
| Subtitle |
Federal / EPA Compliant |
| Subtitles |
Federal / EPA Compliant |
| Tube Material |
Stainless Steel |
| Type |
Direct-Fit |
| Universal Or Specific Fit |
Specific, Specific |
| Warranty Time |
5 |
