K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow.
The K&N 57-6001 FIPK air intake system replaces the restrictive factory air filter and air box in some Nissan 300ZX models. K&N intakes are designed to dramatically reduce intake restriction and improve air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 57-6001 air intake comes with a large, round K&N embossed chrome-topped high-flow air filter that installs onto the factory mass air sensor within the previous air box space. Air is directed through the air filter into the engine's throttle body for a guaranteed power gain. The oversized round air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes requiring commonly available tools to do the job.
- Guaranteed to Increase Horsepower
Information:
Designed To Increase HP And Acceleration; Designed To Improve Throttle Response And Engine Sound; Engineered To Specific Vehicle Design; Easy To Install; Lasts Up To 100 000 Miles Before Service Required; Replaces OEM Filter And AirBox; Air Filter Is Washable And Reusable; Works w/Original Equip. Manufacturer Computer Sys.; Million Mile Limited Warranty
Application Summary:
Year |
Make/Model |
1990-1993 |
Nissan 300ZX |
Attributes |
ASIN |
B000BR6WH2 |
Air Box Included |
No |
Air Filter Color |
Red |
Air Filter Element Washable |
Yes |
Air Filter Height |
7 in (178 mm) |
Air Filter Large End Diameter |
7.500 in. (191mm), 7.5 in (191 mm) |
Air Filter Material |
Cotton Gauze |
Air Filter Oulet Length |
1.000 in. (25mm) |
Air Filter Oulet Width |
6.000 in. (152mm) |
Air Filter Outlet Length |
1 in (25 mm) |
Air Filter Outlet Shape |
Round |
Air Filter Outlet Width |
6 in (152 mm) |
Air Filter Washable |
Yes |
Alternate Part Number |
57-6001 |
CARB EO Number |
D-269-3 |
California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Clamp Color |
Natural |
Clamp Color/Finish |
Natural |
Clamp Material |
Stainless Steel |
Clamp Quantity |
1 |
Clamp Style |
Regular |
Clamps Included |
1 |
Country of Origin (Primary) |
US |
Coupler Color |
Not Applicable |
Coupler Color/Finish |
Not Applicable |
Couplers Included |
No, None |
Emission Code |
Legal US |
Filter Color |
Red |
Filter Material |
Cotton Gauze |
GTIN |
00024844021717 |
Harmonized Tariff Code (Schedule B) |
8421310000 |
Hazardous Material Code |
N |
Item Weight |
4.000 lbs. (1.8 kg) |
Life Cycle Status Code |
Available Only While Supplies Last |
Mass Air Flow Sensor Adapter Included |
No |
Mass Air Flow Sensor Included |
Mass Air Flow Sensor Adapter Included When Required |
Mounting Hardware Included |
Yes |
NAFTA Preference Criterion Code |
B |
Oil Included |
Filter Is Pre-Oiled, Yes |
Package Material |
Paperboard |
Package Type |
Box |
Product Box Height |
9.25 in (235 mm), 9.250 in. (235mm) |
Product Box Length |
15.13 in (384 mm), 15.130 in. (384mm) |
Product Box Width |
9.13 in (232 mm), 9.130 in. (232 mm) |
Product Style |
57 Series FIPK |
Replacement Filter |
RF-1010 |
SDR Required Flag |
N |
Street Legal In All US States |
See Application Link Above, Not legal for sale or use in California on any pollution controlled motor vehicle.
NOTE: Some specific models and years may be legal in CA. Check the CARB status on your parts at knfilters.com. |
TUV Approved (Europe) |
No, No |
Type |
Gen I |
Warranty |
No-Hassle Lifetime Limited |
Weight |
4 lb (1.8 kg) |