Correct Jeep Wrangler JK rear suspension geometry with a JKS Rear Track Bar Relocation Bracket. The design compensates for improper track bar alignment / orientation after adjusting rotation of the axle housing. Requires 2.0 to 6.0 in. suspension lift. The heavy duty steel bracket attaches directly to factory track bar mount on your Jeep's axle housing. It relocates the mounting point 4.0 in. higher to reduce track bar operating angle and improve handling at speed. Eliminates binding and premature bushing wear. Minimizes risk of track bar failure. Protective powder coat finish resists corrosion.
- Heavy-duty reinforcement bracket attaches directly to factory track bar mount on axle housing
- Relocates mounting point 4.0 in. higher to reduce trackbar operating angle and improve handling at high speeds
- Angled design corrects geometry on lifted vehicles with rotated axle housing or CV-type driveshaft to eliminate binding and premature bushing wear
- Economical bolt-on solution minimizes risk of track bar failure on the trail
- Protective powder coat finish resists corrosion
Application Summary:
| Year |
Make/Model |
| 2007-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| GTIN |
00814897011137 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| SDR Required Flag |
N |
