Upgrade the front suspension of your Jeep Wrangler JK with the JKS HD adjustable track bar. Modern JK suspension technology have increased droop travel to the point that the axle bushing of the track bar was becoming a limiting factor. We have corrected that with the use of a high-misalignment style bushing on the axle end, and the OE style rubber bushing at the frame. Recenter the axle, control lateral forces, and run the longest shocks your springs will allow, this HD bar will do its job to keep you on the trail and out of the shop.
- Superior quality replacement for original fixed length panhard rod
- Variable length design properly aligns axle housing with chassis and prevents undue stress on related components
- Fine adjustment threads enable ultra precise axle positioning
- Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearance
- The replaceable COM bearing has a self-lubricating, injection molded race and is rated to 42,000lbs static load for long life and reliable function
- Includes high-angle misalignment spacers to maximize the angular travel of the COM end
Application Summary:
| Year |
Make/Model |
| 2007-2017 |
Jeep Wrangler |
| 2018 |
Jeep Wrangler JK |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| GTIN |
00814897012202 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Installation Difficulty |
Moderate |
| Installation Time |
2-3 |
| Life Cycle Status Code |
Available to Order |
| Maximum Adjusted Length |
34.20 |
| Minimum Adjusted Length |
32.2 |
| SDR Required Flag |
N |
| Suggested Starting Length |
33.25 |
