Fits 2024-2026 Ford Mustang GT 5.0-liter and EcoBoost 2.3L, American Thunder Axle-Back 3.0-inch Stainless Steel Exhaust System, 4.0-inch Dual Polished Tips
Flowmaster introduces our American Thunder axle-back exhaust system for the 2024-2026 Ford Mustang GT with the 5.0-liter engine or the EcoBoost 2.3L engine and the standard factory non-valved exhaust system. This system uses the Super 44 series mufflers for an aggressive exhaust tone and increased performance. Maximum dyno gains of up to 8 hp and 6 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Dual 4.00-inch polished stainless steel tips are used to add a custom look to this iconic vehicle. All the necessary hardware is included and factory mounting locations are used for an easy installation. Fits both coupes and convertibles. Backed by Flowmaster's Lifetime Limited Warranty.
- Max increases of up to 8 hp and 6 lb-ft over the stock exhaust at the rear wheels
- Super 44 series performance muffler offers a deep powerful sound and increased performance
- 409 stainless steel construction delivers extra durability and improved long-term corrosion resistance
- Uses factory hanger locations for easy installation
- 3.00-inch 16-gauge mandrel bent stainless steel tubing helps maintain maximum exhaust flow for better power
- Includes all necessary hardware for an at home installation
- Dual 4.00-inch polished steel tips add a custom look
- Lifetime Limited Warranty
Application Summary:
| Year |
Make/Model |
| 2024-2026 |
Ford Mustang |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
Yes |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exit Position |
DOR |
| Finish |
Painted, High-Temperature Paint |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler (Left) Body Width |
9.50 |
| Muffler Body Length |
10.25, 10.25 |
| Muffler Body Length (in) |
10.25 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Color |
Black, Black |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Diameter |
3.00 |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Location |
Centered, Center |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Material |
409S Stainless Steel, 409 Stainless Steel |
| Muffler Outlet Diameter |
3.00, 3.00 |
| Muffler Outlet Location |
Dual Outlet, Dual |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Overall Length |
16.00, 16.00 |
| Muffler Overall Length (in) |
16 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Super 44, Super 44 |
| Muffler Shape |
Oval |
| Muffler Type |
Reflection, Reflection |
| part type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Black, Black |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust System, Exhaust System |
| SDR Required Flag |
N |
| Single Dual |
Dual |
| Sound Level |
Aggressive / Moderate, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| System Type |
Axle-back |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
4.00 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
5.25 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
2.00 |
| Tip Shape |
Round |
| Tip Style |
Double Wall |
| Tubing Diameter |
3.00 |
| Tubing Diameter (IN) |
3.00 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Axle-Back, Axle-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00090127844700 |
