Fits 2021-2026 Ford Bronco 2.3/2.7-liter, Outlaw Cat-Back 3.0-inch Stainless Steel Exhaust System, 3.0-inch Polished Tip, Single Out Rear Exit, 2 Door Models
Flowmaster introduces our Outlaw cat-back exhaust system for the 2021-2026 Ford Bronco 2 door with the 2.3 or 2.7-liter engine. This system replaces the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 12 hp and 13 lb-ft were measured at the rear wheels. 3.00-inch mandrel bent 409 stainless steel tubing is used to maximize exhaust flow and durability. This step up from the factory pipe size will help maximize gains from additional engine upgrades. The system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off-roading. A polished 3.00-inch stainless steel tip is used to add a custom look to this iconic vehicle. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster's Lifetime Limited Warranty.
- Max increases of up to 12 hp and 13 lb-ft over the stock exhaust at the rear wheels
- Maximum ground clearance with high tuck design
- 409 stainless steel construction delivers extra durability and improved long-term corrosion resistance
- Uses factory hanger locations for easy installation
- 3.00-inch 16-gauge mandrel bent stainless steel tubing helps maintain maximum exhaust flow for better power
- Includes all necessary hardware for an at home installation
- 3.00-inch polished stainless steel tip adds a custom look
- Lifetime Limited Warranty
Information:
Fits 2 door models only Video shown is 4 door model to represent sound characteristics Note: 2021-2026 Bronco cat-back systems will have lower peak dyno results on stock applications when compared to our axle-back systems. This is because the larger 3.0-inch tubing after the factory mid-pipe connection in the cat-back system is optimized for vehicles with additional engine modifications such as tuners, cold air intakes, etc., and is less restrictive when used on higher horsepower applications.
Application Summary:
| Year |
Make/Model |
| 2021-2026 |
Ford Bronco |
| Attributes |
| Body Style |
2 and 4-Door |
| Brand |
Flowmaster, Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes, Yes |
| Catalytic Converter Included |
No, No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
Outlaw, Outlaw |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.00, 3.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Cat Back |
| Exit Position |
Single, SOR |
| Finish |
Natural, Natural |
| Fitment |
2-Door |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Type |
Flanged, Flanged |
| Life Cycle Status Code |
Available to Order |
| Material |
409 Stainless Steel |
| Mount Type |
Uses New Hangers (Included), Uses New Hangers (Included) |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Included |
Yes, Yes |
| Muffler Part Number |
Not Included, Not Included |
| NAFTA Preference Criterion Code |
B |
| part type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust System, Exhaust System |
| SDR Required Flag |
N |
| Single Dual |
Single |
| Sound Level |
Aggressive, Aggressive |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| System Type |
Cat-back |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
4.75 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
1.00 |
| Tip Shape |
Round |
| Tip Style |
Single Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3.00 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00090127614464 |
