Fits 2021-2023 Jeep Gladiator 3.0-Liter Diesel, Filter-Back, Single Rear Exit, American Thunder Stainless Steel Exhaust System
This Flowmaster® American Thunder® cat-back exhaust system for the 2021-2023 Jeep Gladiator trucks with the 3.0-liter diesel engine is manufactured using durable 409 stainless steel throughout and features 3.00-inch mandrel bent pipes for better exhaust gas flow. This system removes the muffler for an aggressive to moderate sound level and maximum performance, while also adding additional clearance when driving off-road. Maximum dyno gains of 3 hp and 5 lb-ft over stock were measured at the rear wheels. This system exits with a 3.00-inch polished stainless steel tip for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster's Lifetime Limited Warranty.
- 3.00-inch mandrel bent 16-gauge 409 stainless steel tubing maximizes exhaust flow and improves durability
- 3.00-inch polished stainless steel tip adds a custom look to the truck
- Includes complete hardware and factory styled hangers in the stock locations for an easy installation
- Max dyno gains of 3 hp and 5 lb-ft at the rear wheels
Information:
2021-2023 Jeep Gladiator trucks with 3.0-liter diesel engine.
Application Summary:
| Year |
Make/Model |
| 2021-2023 |
Jeep Gladiator |
| Attributes |
| Brand |
Flowmaster |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.00, 3.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Cat-Back |
| Exit Position |
SOR |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Type |
Flanged, Flanged |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mount Type |
Uses Factory Hangers, Uses Factory Hangers |
| Mounting Bracket Included |
No, No |
| Muffler Included |
Yes |
| Muffler Part Number |
Kit Only, Kit Only |
| NAFTA Preference Criterion Code |
B |
| part type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust System, Exhaust System |
| SDR Required Flag |
N |
| Single Dual |
Single |
| Sound Level |
Aggressive / Moderate, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| System Type |
Tailpipe |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Cut |
Angle |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Edge Style |
Cut |
| Tip Finish |
Polished |
| Tip Length |
4.75 |
| Tip Logo |
Embossed, Embossed |
| Tip Material |
304 Stainless, 304 Stainless Steel |
| Tip Quantity |
1.00 |
| Tip Shape |
Round |
| Tip Style |
Single Wall |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3.00 |
| Tubing Material |
409S Stainless Steel, 409 Stainless Steel |
| Type |
Cat-Back, Tailpipe |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| GTIN |
00090127615522 |
