Fits 1967-1972 Chevrolet/GMC C10, C15 1/2 ton trucks with V8 engines. Stainless Steel. - Aggressive to moderate sound
This American Thunder exhaust system is specifically designed for 1967-1972 Chevrolet and GMC C10 and C15 1/2 ton 2wd trucks with coil spring suspension. The system is perfect for the person looking for a moderate to aggressive interior and exterior sound level. Starting at the Crossmember-Back, the exhaust comes complete with a built-in H-pipe crossover, all mandrel-bent 2.50-inch stainless steel tubing, a pair of Super 44 Series performance mufflers, and your choice of four tailpipe exits. One set slightly angled down to clear larger rear bumpers, one set straight out the back under the rear bumper, out the sides behind the rear tires for that classic truck look or a dump style exiting behind the rear tires level with the body. The system includes all hardware necessary for installation and provides adequate clearance for substantially lowered vehicles. The exhaust system is covered by our Lifetime Limited Warranty. If you prefer Aluminized steel construction, check out system #17654 which comes with our 3-year Limited Warranty. Fits both short and long wheelbase trucks.
- Super 44 Series Mufflers for Deep Powerful Sound
- Includes Hangers and Hardware for Installation
- Crossmember-Back True Dual Exhaust System
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Aggressive to Moderate Exterior Exhaust Tone
- H-pipe Crossover for Maximum Power
- Four Choices of Tailpipe Exits
- Lifetime Limited Warranty
Information:
Does Not include exhaust tips, header reducer cones or downpipes for factory manifolds.
Application Summary:
| Year |
Make/Model |
| 1967-1972 |
Chevrolet C10 Pickup |
| 1967-1972 |
GMC C15/C1500 Pickup |
| Attributes |
| 2WD/4WD |
RWD, 2WD |
| ASIN |
B00DOV4NNW |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Multiple Tailpipe Exit Options |
| Bullet Point #3 |
Patented Delta Flow Technology |
| Bullet Point #4 |
Lifetime Limited Warranty |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
2WD, 2WD |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear Same Side, Dual Out Rear / Dual Out Side |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042029877 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Inlet Type |
Weld-On, Weld-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
13.00, 13.00 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
9.50 |
| Muffler Count |
2 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Super 44 Series, Super 44 Series |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Sale Category |
Exhaust |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50, 2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Shape |
Round |
| Tip Size |
N/A |
| Truck Bed Length |
Long Bed, Short Bed |
| Tube Diameter |
2.5 inch, 2.50 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Type |
Crossmember-back, Crossmember-back |
| Type of Exhaust |
Header-Back, Crossmember-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System |
