Fits 2011-2018 Chevrolet Silverado/GMC Sierra 1500 trucks with 6.2L engine.
This Force II® Cat-back stainless steel exhaust system is designed for 2011-2018 Chevrolet Silverado and GMC Sierra 1500 trucks with the 6.2L engine. Features include large 3.50-inch mandrel-bent tubing flowing into a Flowmaster 50 Series Big Block™ muffler for a muscular exterior sound, while the built-in Helmholtz chamber helps control the interior resonance. The system uses the factory hanger locations for an easy installation and is finished off with a highly polished 4.00-inch 304 stainless steel tip embossed with the Flowmaster® logo. This bolt-on system delivers noticeable performance gains while offering moderate interior and exterior sound levels and is covered by our Lifetime Limited Warranty.
- Dyno Tuned For Maximum Performance
- 50 Series Big Block Performance Muffler
- Large 3.50-inch Mandrel-bent Tubing
- Uses the Factory Hanger Locations
- Stainless Steel Construction
- Lifetime Limited Warranty
- Delta Flow Technology
- Flowmaster Quality
Information:
Fits 2011-2018 Chevrolet Silverado/GMC Sierra 1500 trucks with 6.2L engine. Crew Cab/Short bed & Extra Cab/Standard bed models (143-inch wheelbase.)
Application Summary:
| Year |
Make/Model |
| 2011-2018 |
Chevrolet Silverado 1500 |
| 2011-2018 |
GMC Sierra 1500 |
| Attributes |
| 2WD/4WD |
RWD/4WD, 2WD |
| ASIN |
B009IKI276 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Dyno Tuned For Maximum Performance |
| Bullet Point #3 |
Patented Delta Flow Technology |
| Bullet Point #4 |
Flowmaster Quality |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
4WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
10.00 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042027651 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
3.500 in., 3.50 |
| Inlet Diameter (in) |
3.5 |
| Inlet Inside Diameter |
3.500 in. |
| Inlet Inside Diameter (in.) |
3.5 |
| Inlet Size (in.) |
3.5 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
No, No |
| Muffler Body Diameter |
12.00, 12.00 |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
12.00 |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
3.50, 3.50 |
| Muffler Inlet Outside Diameter |
3.50, 3.50 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
50 Series Big Block, 50 Series Big Block |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.500 in., 3.50 |
| Outlet Diameter (in) |
3.5 |
| Outlet Outside Diameter |
4.000 in. |
| Outlet Outside Diameter (in.) |
4 |
| Outlet Size (in.) |
4 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.500 in. |
| Tail Pipe Outlet Outside Diameter |
3.50 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.500 in., 3.50 |
| Tubing Diameter (IN) |
3.5 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System |
