2008-2014 Dodge Challenger SRT8, 6.1L or 6.4L Hemi engines. - Aggressive sound
This Flowmaster® Outlaw Cat-back exhaust system is designed for 2008-2014 Dodge Challenger SRT8 models with the 6.1L or 6.4L Hemi engine, and are perfect for the person looking for an aggressive interior and exterior sound level at all times. The system includes dual 3.00-inch mandrel-bent stainless steel tubing flowing into our exclusive Scavenger Series® X-pipe for a deep unique sound while making maximum power. The tubing then runs into a pair of race-proven Outlaw® Series mufflers and the tailpipes utilize the factory hanger locations for an easy installation. They are finished off with polished rectangular 304 stainless steel tips for a muscular look to match the lines of the Challenger. The system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home.
- Exclusive Scavenger X-pipe for Maximum Horsepower and Torque
- Large 3.00-inch Mandrel-bent Dual Exhaust System
- Dyno Tuned For Maximum Performance
- Aggressive Exterior & Interior Sound
- Uses the Factory Hanger Locations
- Stainless Steel Construction
- Lifetime Limited Warranty
- Very Aggressive Sound
- Easy Installation
Information:
2008-2014 Dodge Challenger SRT8, 6.1L or 6.4L Hemi engines.
Application Summary:
| Year |
Make/Model |
| 2008-2014 |
Dodge Challenger |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B007QQNMC4 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Connects After Factory Catalytic Converter |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
2WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Outlaw, Outlaw |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.00 x 7.00, 3.00 x 7.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
7.25 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042026180 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
No, No |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Left) Body Width |
4.00 |
| Muffler (Right) Body Height |
4.00 |
| Muffler (Right) Body Width |
4.00 |
| Muffler Body Diameter |
4.00, 4.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
6.50, 6.50 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Round, Round |
| Muffler Body Width |
4.00 |
| Muffler Count |
2 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Outlaw Delta Force, Outlaw |
| Muffler Type |
Straight-Through, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Position |
Dual |
| Outlet Size (in.) |
3 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Outlaw Exhaust Systems |
| Sound Level |
Aggressive, Aggressive |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tail Pipe Quantity |
2, 2 |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Quantity |
2 |
| Tip Shape |
Rectangle |
| Tip Size |
3 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System |
