2010-2013 Chevrolet Camaro SS with 6.2L engine, fits both hard top and convertible models. - Mild sound
This Flowmaster® Force II® Axle-back system is designed specifically for the 2010-2013 Chevrolet Camaro SS with 6.2L engine and features specially tuned resonator performance mufflers that provide a moderately aggressive exterior sound level, with a very mild interior sound level. The system includes heavy duty band-style clamps for a secure, leak free installation and is constructed from 3.00-inch mandrel-bent stainless steel and finished off with large 4.00-inch polished stainless steel exhaust tips. System comes with all necessary parts, hardware and instructions for an easy installation you can do at home. Covered by our Limited Lifetime Warranty. Notes: Fits coupes and convertible models. Does Not fit vehicles equipped with the factory Ground Effects package.
- Includes hangers and Hardware for an Easy Installation
- Specially Designed Resonator Performance Mufflers
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Moderately Aggressive Exterior Exhaust Tone
- Uses the Factory Hanger Locations
- Lifetime Limited Warranty
- Easy Installation
Information:
Fits 2010-2013 Chevrolet Camaro SS with 6.2L engine. Fits both coupes and convertibles. Does not fit vehicles equipped with the factory ground effects package.
Application Summary:
| Year |
Make/Model |
| 2010-2013 |
Chevrolet Camaro |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B005CUG5UC |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Stock to mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Axle-back System |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Clearance Category |
Exhaust |
| Country of Origin (Primary) |
US |
| Discount Percentage |
26-50% |
| Drive |
2WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust Tip Diameter |
4.00, 4.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
5.25 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042024971 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
No, No |
| Muffler (Left) Body Height |
4.00 |
| Muffler (Right) Body Height |
4.00 |
| Muffler Body Diameter |
5.00, 5.00 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
19.00, 19.00 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
8.00 |
| Muffler Count |
2 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Outside Diameter |
3.00, 3.00 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Special Built, Special Built |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Pipe Color |
Black, Black |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Mild, Mild |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
Axle Back, Axle-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
4.000 in., 4.00 |
| Tip Diameter (in) |
4 |
| Tip Diameter (in.) |
4 |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Size |
4.0 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Axle-Back, Axle-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System |
