2009-2021 Toyota Tundra 4.6L, 4.7L and 5.7L engines. - Moderate sound
The Flowmaster® Force II® Cat-back exhaust system fits 2009-2021 Toyota Tundra trucks with the 4.6L, 4.7L or 5.7L engine and regular cab/long bed, double cab/short bed and CrewMax configurations. Manufactured using durable 409S stainless steel, the kit features a flanged dual inlet with mandrel-bent 2.50-inch stainless steel tubing running back into a 50-Series Big Block™ performance muffler, exiting into dual 2.50-inch tailpipes. Includes both side and rear exit tailpipes in the kit, so you can choose the desired look for your truck, and the tailpipes are finished off with 3.00-inch polished 304 stainless steel tips embossed with the Flowmaster name. As a Force II system it provides improved horsepower and torque, along with a moderate performance sound level both inside and outside the truck. Instructions and all the necessary hardware are included with the kit for an easy bolt-on installation and is covered by our Lifetime Limited Warranty. Note: Does NOT fit regular cab/short bed or double cab long bed configurations and Only fits models built after 08/01/2008.
- Improves Torque, Horsepower and Throttle Response
- Includes Both Side and Rear Exit Tailpipes
- Mandrel-bent Stainless Steel Tubing
- Uses the Factory Hanger Locations
- Mild Interior Tone without Drone
- Moderate Exterior Exhaust Tone
- Clears the Factory Spare Tire
- Lifetime Limited Warranty
- Easy Installation
Information:
Fits 2009-2021 Toyota Tundra with the 4.6L, 4.7L or 5.7L engine. Fits 2 or 4 wheel drive and all wheelbases, except regular cab/short bed or double cab/long bed configurations. Will only fit models built after 08/01/2008.
Application Summary:
| Year |
Make/Model |
| 2009-2021 |
Toyota Tundra |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0035JHO8Y |
| Automotive Item Grade |
High Performance, High Performance Part |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Color |
Black Muffler; Natural Tubing; Brushed Tip, Black muffler, natural tubing, brushed tip |
| Country of Origin (Primary) |
US |
| Drive |
2WD, 4WD |
| Emission Code |
5, 5 |
| Exhaust Pipe Max Diameter |
2.500 in., 2.50 |
| Exhaust Pipe Max Diameter (in) |
2.5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.00, 3.00 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
13.00 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
2, 2 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear Same Side, Dual Out Rear / Dual Out Side |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042023714 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Flanged, Flanged |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
12.00 |
| Muffler Color |
Black, Black |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Outlet Quantity |
2, 2 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
50 Series Big Block, 50 Series Big Block |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
3.000 in., 3.00 |
| Tip Diameter (in) |
3 |
| Tip Diameter (in.) |
3 |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Size |
3 in. |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System |
