Fits 2000-2006 Chevrolet Tahoe & GMC Yukon with 4.8L or 5.3L engine. - Mild sound
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides, the S.O.S. (single out side) systems are the perfect choice. This Force II® system delivers a moderate exterior tone and a mild interior tone, and is suited to customers looking for efficiency improvements without a lot of noise. The system is constructed from 3.00-inch mandrel-bent 409 stainless steel tubing flowing into a 50 Series Big Block™ performance muffler for a moderate exterior tone with a mild to moderate interior tone and maximum power. The system is perfect for towing applications since the tailpipe exits behind the right side rear wheel to avoid blowing exhaust on your boat or trailer when towing. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, this system includes all necessary parts, hardware and easy to follow instructions.
- Includes Hangers and Hardware for an Easy Installation
- Lifetime Limited Warranty
- Flowmaster Quality
- Large 3.50-inch Polished 304 Stainless Steel Tip
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Connects After Factory Catalytic Converter
- 50 Big Block Series Performance Muffler
- Uses the Factory Hanger Locations
- Minimal to No Interior Drone
- Mild Exterior Exhaust Tone
Information:
Fits 2000-2006 Chevrolet Tahoe & GMC Yukon with 4.8L or 5.3L engine.
Application Summary:
| Year |
Make/Model |
| 2000-2006 |
Chevrolet Tahoe |
| 2000-2006 |
GMC Yukon |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0069ICPRI |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Connects After Factory Catalytic Converter |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
2WD, 4WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
3.50, 3.50 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Length |
12.00 |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
1, 1 |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042025480 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Size (in.) |
3 |
| Inlet Type |
Flanged, Flanged |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
No, No |
| Muffler Body Height |
5.00 |
| Muffler Body Length |
22.00, 22.00 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
12.00 |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
50 Series Big Block, 50 Series Big Block |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
3.500 in., 3.50 |
| Tip Diameter (in) |
3.5 |
| Tip Diameter (in.) |
3.5 |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tip Size |
3.5 in. |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System |
