Fits 1967-1974 Chevrolet Camaro, Pontiac Firebird with V8 engine. 2.50 inch Stainless Steel - Moderate sound
Flowmaster® is proud to introduce our American Thunder® dual exhaust system for 1967-1974 Chevrolet Camaro, Pontiac Firebird and 1968-1974 Chevrolet Nova's. This all stainless steel exhaust system features our exclusive design 80 Series™ Crossflow muffler, all mandrel-bent dual 2.50-inch pipes including an H-pipe crossover for a deep smooth tone that also minimizes any back-rap on deceleration. The dual 2.50-inch stainless steel tailpipes provide a deep rich sound and optimum performance. This Crossmember-Back 409S stainless system gives these classic muscle cars a moderate tone inside and out. Using the crossflow design, this exhaust places the muffler in the factory location behind the rear axle retaining full ground clearance under the car while offering all the performance benefits of a full dual exhaust system. The system includes all parts, hardware and illustrated instructions, and like all Flowmaster stainless steel street products, it includes our Limited Lifetime Warranty.
- H-pipe Crossover for Maximum Power and Deep Tone
- Includes Hangers and Hardware for Easy Installation
- 80 Series Cross-flow Performance Muffler
- Mandrel-bent Stainless Steel Tubing
- Moderate Exterior Exhaust Tone
- Maximum Ground Clearance
- Stainless Steel Construction
- Lifetime Limited Warranty
- Crossmember-Back System
Information:
Convertible models require 3/8-inch of shims on the factory X-brace for clearance of the exhaust tubing.
Application Summary:
| Year |
Make/Model |
| 1967-1974 |
Chevrolet Camaro |
| 1968 |
Chevrolet Chevy II |
| 1969-1974 |
Chevrolet Nova |
| 1967-1974 |
Pontiac Firebird |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B005OLB1C6 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| CARB (California) Compliant |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
2WD, 2WD |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| GTIN |
00700042024773 |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.500 in. |
| Inlet Inside Diameter (in.) |
2.5, N/A |
| Inlet Size (in.) |
2.5, N/A |
| Inlet Type |
Weld-On, Weld-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler (Rear) Body Height |
4.00 |
| Muffler (Rear) Body Width |
9.50 |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
22.25, 22.25 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
80 Series Crossflow, 80 Series Crossflow |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| Pipe Color |
Silver, Black |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50, 2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Shape |
Round |
| Tip Size |
N/A |
| Tube Diameter |
2.5 inch, 2.50 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Type |
Crossmember-back, Crossmember-back |
| Type of Exhaust |
Header-Back, Crossmember-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust System Kit, Exhaust System |
