Scavenger Crossover Pipe Kit - 3.00 in. - universal 5-piece kit 409SS
Our universal stainless steel Scavenger X-Pipe kits mount ahead of the mufflers in place of a traditional H-pipe and can provide significant torque improvement. Commonly referred to as an X-Pipe, not all X-Pipes are created equal. As any engineer will tell you, crossing exhaust streams incorrectly can create huge turbulence with the exhaust systems causing great harm to horsepower and torque generation. Flowmaster's patented and exclusive D-Port technology allows the exhaust pulse to create a low-pressure area that helps pull, or scavenge, the next exhaust pulse from the paired set of tubes. These systems work to produce significant torque improvement and are well-suited to modified "muscle car" application yet retain the classic Flowmaster sound.
- Can produce significant torque improvement
- Patented D-Port technology
- Universal X pipe kit 3.00 in. diameter
- Mandrel bent 16 gauge stainless steel tubing
Information:
Universal Item - Not a direct fit. Some adaptation required.
Front width approximately 29.50-inches
Rear width approximately 12.25-inches
Application Summary:
| Year |
Make/Model |
| Universal |
Item - Not a direct fit. Some adaptation required. |
| Attributes |
| ASIN |
B0084C9IM2 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Universal X pipe kit 3.00 in. diameter |
| Bullet Point #3 |
Patented D-Port technology |
| Bullet Point #4 |
Can produce significant torque improvement |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
No |
| Components Included |
Crosspipes, Crosspipes |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Finish |
Natural, Natural |
| GTIN |
00700042022991 |
| Gasket Or Seal Included |
No |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Attachment Type |
Clamp-On, Weld-On |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
2.87 |
| Inlet Quantity |
2, 2 |
| Inlet Type |
Weld-On, Weld-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3.00, 3.00 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Material Gauge |
16, 16 |
| Mount Type |
No, No |
| NAFTA Preference Criterion Code |
B |
| Outlet Attachment Type |
Weld-On, Clamp-On |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Inside Diameter |
2.87 |
| Outlet Quantity |
2, 2 |
| Overall Diameter |
3.000 in., 3.00 |
| Overall Diameter (in) |
3 |
| Overall Height |
9.500 in., 9.50 |
| Overall Height (in) |
9.5 |
| Overall Length |
37.750 in., 37.75 |
| Overall Length (in) |
37.75 |
| Overall Length (in.) |
37.750 in. |
| Overall Width |
16.000 in., 16.00 |
| Overall Width (in) |
16 |
| Pipe Diameter |
3.00 |
| Position |
N/A |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| Quantity |
1 |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Single Dual |
Dual, Dual |
| Single or Dual |
Dual |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
X-Pipes and Crossovers |
| System Type |
Pipe, Pipe Kit |
| Tube Diameter |
3 inch, 3.00 |
| Universal Or Specific Fit |
Universal |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| part type |
Exhaust X Pipe, Exhaust X Pipe |
