Fits 1992-1995 Chevrolet Blazer, GMC Jimmy with 5.7L engine. - Moderate sound
This Flowmaster American Thunder® cat-back exhaust system is custom designed for 1992-1995 Chevrolet Blazer and GMC Jimmy with 5.7L engine and is perfect for the person looking for a mild to moderate sound level inside and moderate tone outside, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a flanged 3.00-inch mandrel-bent aluminized steel inlet pipe flowing into a Super 50 Series™ muffler for a deep powerful tone. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with an angle cut turn down style tip exiting behind the right rear wheel and uses the factory hanger locations for an easy installation. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for a quick and easy installation you can do at home.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- Moderate Exterior Exhaust Tone
- Easy Installation
Information:
Fits 1992-1995 Chevrolet Blazer and GMC Jimmy with 5.7L engine, fits 2/4 wheel drive, for early 1995 fit check factory catalytic converter.
Application Summary:
| Year |
Make/Model |
| 1992-1994 |
Chevrolet Blazer |
| 1992-1995 |
GMC Yukon |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B000CNLA36 |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt, U-Bolt |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
4WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Diameter |
2.50 |
| Exhaust Tip Finish |
Polished |
| Exhaust Tip Length |
15.20 |
| Exhaust Tip Material |
304 Stainless Steel |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| Finish |
Aluminized, Aluminized |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Flanged, Flanged |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Length |
17.00, 17.00 |
| Muffler Body Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
Yes, Yes |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes, Yes |
| Muffler Inlet Inside Diameter |
3.00, 3.00 |
| Muffler Inlet Outside Diameter |
3.13, 3.13 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
53058, 53058 |
| Muffler Quantity |
1, 1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
3.000 in., 3.00 |
| Outlet Diameter (in) |
3 |
| Outlet Outside Diameter |
3.000 in. |
| Outlet Outside Diameter (in.) |
3 |
| Outlet Size (in.) |
3 |
| part type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Moderate, Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
3.000 in. |
| Tail Pipe Outlet Outside Diameter |
3.00, 3.00 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tubing Diameter |
3.000 in., 3.00 |
| Tubing Diameter (IN) |
3 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warranty Time |
36 |
| GTIN |
00700042013623 |
