1987-1996 Ford Bronco with 5.0L or 5.8L engine using a slip fit catalytic converter. - Mild sound
This Flowmaster Force II® cat-back exhaust system is custom designed for 1987-1996 Ford Bronco with 5.0L or 5.8L engine using a slip fit catalytic converter and is perfect for the person looking for a mild to moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a 2.25-inch mandrel-bent aluminized steel inlet pipe flowing into a Super 50™ muffler for a deep mellow tone. The single aluminized steel mandrel-bent tailpipe has an angle cut style tip that exits behind the right rear wheel and uses the factory hanger locations. Note: Fits 2/4 wheel drive models.
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Tubing
- Mild to Moderate Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
Information:
Fits 1987-1996 Ford Bronco with 5.0L or 5.8L engine using a slip fit catalytic converter. Fits 2/4 wheel drive models.
Application Summary:
| Year |
Make/Model |
| 1987-1996 |
Ford Bronco |
| Attributes |
| 2WD/4WD |
2WD, 4WD |
| ASIN |
B0099RT6DM |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Mild exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
No |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
U-Bolt, U-Bolt |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
4WD, 2WD |
| Emission Code |
5, 5 |
| Exhaust Series |
Force II, Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Quantity |
Sold Separately |
| Exhaust Type |
Single |
| Exit Position |
Single Side, Single Side Exit |
| Exit Style |
Straight |
| Finish |
Aluminized, Aluminized |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.250 in., 2.25 |
| Inlet Diameter (in) |
2.25 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Clamp-On, Clamp-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/4 |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Material |
Aluminized Steel, Aluminized Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Count |
1 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.25, 2.25 |
| Muffler Inlet Outside Diameter |
2.38, 2.38 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
Kit Only, Kit Only |
| Muffler Quantity |
1, 1 |
| Muffler Series |
Super 50 Series, Super 50 Series |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.25 |
| Outlet Diameter (in) |
2.25 |
| Outlet Outside Diameter |
2.250 in. |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Size (in.) |
2.25 |
| part type |
Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
Aluminized Steel, Aluminized Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Force II Exhaust Systems |
| Single Dual |
Single |
| Single or Dual |
Single |
| Sound Level |
Mild, Mild |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Cat-Back Exhaust Kits |
| System Type |
Cat Back, Cat-back |
| Tail Pipe Diameter |
2.250 in. |
| Tail Pipe Outlet Outside Diameter |
2.25, 2.25 |
| Tail Pipe Quantity |
1, Single |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
N/A |
| Tip Quantity |
Not Included |
| Tip Size |
N/A |
| Tubing Diameter |
2.250 in., 2.25 |
| Tubing Diameter (IN) |
2.25 |
| Type |
Cat-Back, Cat-Back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warranty Time |
36 |
| GTIN |
00700042010226 |
