Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons
These Builder Series tailpipes are constructed from 2.50-inch mandrel-bent 16-gauge aluminized steel tubing for maximum flow, tuck up high in the chassis for good clearance and exit straight-out the back under the rear bumper. Designed to be used with Side Inlet/Center Outlet mufflers such as part# 942546 (Super 44 Series) or 53056 (Super 50 Series) mufflers. Covered by our 3-year Limited Warranty. Note: Some fitment may be necessary. Does Not include installation hardware or exhaust tips.
- Designed for Off-set Inlet/Center Outlet Mufflers
- Exits Straight-out under the Rear Bumper
- Mandrel-bent for Maximum Performance
- High Clearance around Rear Differential
- 16 Gauge Aluminzed Steel Tubing
- Does Not Include Hardware
- 3-year Limited Warranty
Information:
Fits 1955-1957 Chevrolet 2 Dr/4 Dr Sedan & Coupe. Does Not fit Wagons. Designed for Offset Inlet/Center Outlet mufflers.
Application Summary:
| Year |
Make/Model |
| 1955-1957 |
Chevrolet Bel Air |
| 1955-1957 |
Chevrolet One-Fifty Series |
| 1955-1957 |
Chevrolet Two-Ten Series |
| Attributes |
| ASIN |
B000CE9NP2 |
| Automotive Item Grade |
High Performance, High Performance |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 Gauge Tubing |
| Bullet Point #2 |
Exits at rear of vehicle |
| Bullet Point #3 |
Aluminized steel |
| Bullet Point #4 |
Premium Quality |
| California Proposition 65 |
No |
| Category |
Exhaust, Exhaust |
| Clamps Included |
No |
| Color |
Gray, Gray |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exit Position |
Dual Rear, Dual Rear Exit |
| Finish |
Aluminized |
| Fitment |
Direct OE Replacement, Direct Fit |
| Flanged Inlet |
No |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
2.50 |
| Inlet Outside Diameter |
2.63 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Aluminized Steel, Aluminized Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Inside Diameter |
2.50 |
| Outlet Outside Diameter |
2.63 |
| Overall Length |
65.250 in., 65.25 |
| Overall Length (in) |
65.25 |
| Overall Length (in.) |
65.250 in. |
| part type |
Exhaust Tail Pipe |
| Position |
N/A |
| Product Type |
Exhaust Accessories, Exhaust Accessories |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
Builder Accessories |
| Sub Category |
Exhaust and Tail Pipes |
| Subcategory |
Miscellaneous Exhaust |
| System Type |
Tailpipe, Tailpipe Kit |
| Tapered Outlet |
No |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (IN) |
2.5 |
| Universal Or Specific Fit |
Specific Fit |
| Warranty Time |
36 |
| Welded Hanger |
No |
| GTIN |
00700042014682 |
