CURT 56175 Non-Powered 3-to-2-Wire Splice-in Tail Light Converter, 4-Pin Wiring Harness
When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by splicing into the vehicle's electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname taillight converters. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This CURT electrical converter is designed to convert a 3-wire system to a 2-wire system and provides a standard 4-way flat connector socket to plug in your trailer. It is designed to fit certain models of Acura, Audi, Buick, Chevrolet, Chrysler, Dodge, Eagle, Ford, Geo, Honda, Hyundai, Infiniti, Isuzu, Kia, Mazda, Mercedes, Mercury, Mitsubishi, Nissan, Oldsmobile, Peugeot, Plymouth, Pontiac, Saturn, Suzuki, Toyota, Volkswagen and Volvo (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). This converter is made with cutting-edge surface-mount technology (SMT) circuitry, featuring electrical components that are mounted directly to the surface of the board rather than being inserted into a series of holes. SMT circuits have longer life cycles, lower resistance, reduced heat generation and are more reliable than through-hole-mounted components.
- Converts 3-Wire Vehicle System To Standard 2-Wire Trailer Wiring
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance/Durability
- Color-Coded Wires For Easier Installation
- Snap Locks Included For Fast Secure Splicing
- No Heavy-Duty Flasher Or Direct Battery Connection Required
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
Application Summary:
| Year |
Make/Model |
| 1990-2003 |
Mazda Protege |
| 2002-2003 |
Mazda Protege5 |
| 2008-2010 |
Mitsubishi Lancer |
| Attributes |
| ASIN |
B0049CM1LG |
| Box Height in Inches - XA |
2 |
| Box Length in Inches - XA |
7 |
| Box Width in Inches - XA |
4 |
| California Proposition 65 |
Yes |
| Circuit-Protected |
Yes |
| Class ID |
11 |
| Country of Origin (Primary) |
CN |
| Emission Code |
Legal US |
| Finish - XA |
N/A |
| GTIN |
00612314561759 |
| Harmonized Tariff Code (Schedule B) |
8537109170 |
| Hazardous Material Code |
N |
| Install Time |
5 Minutes |
| Item Class - XA |
CME |
| Item Height - XA |
0.000 |
| Item Length - XA |
0.000 |
| Item Width - XA |
0.000 |
| Life Cycle Status Code |
Available to Order |
| Long Description |
Converter,Cp,Packaged(Sm) |
| NAFTA Preference Criterion Code |
B |
| Output Type |
4-Way Flat |
| Parcel Allowed - XA |
Yes |
| Product Weight - XA |
0.000 |
| Rate Class - XA |
70.0 |
| Retail Height - XA |
2.000 |
| Retail Length - XA |
9.000 |
| Retail Width - XA |
4.000 |
| SDR Required Flag |
N |
| Shipping Weight - XA |
0.590 |
| Tail Light Circuits |
5.0 Amps Per Circuit |
| Tariff 301 - XA |
Yes |
| Turn and Brake Circuits |
3.0 Amps Per Circuit |
| WARNING CA Proposition 65 |
Yes |
| WARNING CA Proposition 65 Message |
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate which is known to the State of California to cause cancer and Di-n-butyl phthalate which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Warranty |
One-Year Limited Warranty |
| Warranty Time |
1 |
