CURT 13534 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Toyota Highlander
Whatever your task at hand -- whether it's launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Highlander (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 750 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
Application Summary:
| Year |
Make/Model |
| 2008-2013 |
Toyota Highlander |
| Attributes |
| ASIN |
B001EOWQAS |
| Body Shape |
Round |
| Box Height in Inches - XA |
22 |
| Box Length in Inches - XA |
48 |
| Box Width in Inches - XA |
10 |
| California Proposition 65 |
N |
| Class ID |
3 |
| Country of Origin (Primary) |
US |
| Drilling Required |
No |
| Emission Code |
Legal US |
| Finish |
Gloss Black Powder Coat |
| Finish - XA |
GLOSS BLACK POWDER COAT |
| GTIN |
00612314135349 |
| Gross Trailer Weight |
5000 lbs. |
| Gross Trailer Weight (lbs.) |
5000 |
| Harmonized Tariff Code (Schedule B) |
8708998180 |
| Hazardous Material Code |
N |
| Install Time |
45 Minutes |
| Item Class - XA |
MFH |
| Item Height - XA |
9.740 |
| Item Length - XA |
45.310 |
| Item Width - XA |
24.130 |
| Life Cycle Status Code |
Available to Order |
| Long Description |
Class III Trailer Hitch |
| Main Body Shape |
Round |
| NAFTA Preference Criterion Code |
B |
| Parcel Allowed - XA |
Yes |
| Position |
Rear |
| Product Weight - XA |
38.000 |
| Rate Class - XA |
70.0 |
| Receiver Tube Size |
2 IN |
| Retail Height - XA |
11.000 |
| Retail Length - XA |
49.000 |
| Retail Width - XA |
24.000 |
| SDR Required Flag |
N |
| Shipping Weight - XA |
44.000 |
| Tariff 301 - XA |
No |
| Tongue Weight (TW) |
750 LB |
| Tongue Weight(TW) |
500 LB |
| Visibility |
Exposed |
| WARNING CA Proposition 65 |
No |
| WC Tongue Weight |
500 |
| Warranty |
Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Weight Carrying Capacity |
5000 |
| Weight Carrying Capacity (WC) |
5,000 LB |
| Weight Carrying Capacity(WC) |
5,000 LB |
| Weight Distribution (WD) |
n/a |
| Weight Distribution Tongue Weight (WDTW) |
n/a |
| Weight Distribution Tongue Weight(WDTW) |
n/a |
| Weight Distribution(WD) |
n/a |
