MACH Force-Xp 304 Stainless Steel Axle-Back Exhaust System w/ Polished Tips Chevrolet Corvette Z06 (C7) 15-19 V8-6.2L (sc)
Aggressive Sound: Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Exhaust Valve: This axle-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Simple Installation: is MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Quad 4" Polished Tips: Finishing off this system are quad 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style. Leak-Free Seal: High quality band clamps are used for a complete 360 degree sealing surface. Brushed 304 SS Construction: The performance axle-back exhaust system is constructed of 3" to 2-1/2" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking. Note: Failures of original equipment AFM and NPP actuators are not covered by aFe Power(R) warranty. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.
- 100% Hand TIG-Welded 304 Stainless Steel Tubing
- 3 in. To 2.5 in. Mandrel Bent Tubing
- Brushed Finish
- Includes Factory Style NPP Dual Mode Exhaust Valves
- Utilizes Unique Dual High Flow Stainless Steel Mufflers
- Includes Quad 4 in. Polished Stainless Steel Tips
- Uses All Factory Hanger Locations For A Hassle Free Install
Application Summary:
| Year |
Make/Model |
| 2015-2019 |
Chevrolet Corvette |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Clamps Included |
Yes |
| Country of Origin (Primary) |
US |
| Exhaust Pipe Material |
Stainless Steel |
| Exhaust Type |
Axle-Back |
| Exit Location |
Rear center |
| Exit Position |
Quad Center |
| Exit Quantity |
Quad |
| Exit Style |
Straight |
| GTIN |
00802959630150 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Horse Power Increase |
7 |
| Inlet Inside Diameter |
3.000 in. - 2.500 in. |
| Inlet Inside Diameter (in.) |
3 To 2.5 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3.000 in. |
| Main Piping Diameter (in.) |
3 |
| Material |
304 Stainless Steel |
| Muffler Count |
2 |
| Muffler Finish |
Brushed |
| Muffler Included |
Yes |
| Muffler Material |
304 Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| Pipe Material |
304 Stainless |
| SDR Required Flag |
N |
| Sound Level |
Aggressive |
| System Finish |
Brushed |
| System Material |
304 Stainless Steel |
| System Type |
Axle Back |
| Tail Pipe Material |
Stainless Steel |
| Tip Cut |
Straight |
| Tip Diameter |
4.000 in. |
| Tip Diameter (in.) |
4 |
| Tip Edge Style |
Non-rolled edge, single-wall |
| Tip Finish |
Polished |
| Tip Material |
Carbon Fiber |
| Tip Outlet Size |
4 |
| Tip Quantity |
Four |
| Tip Size |
4.0 in. |
| Torque Increase |
10 |
| Tubing Diameter |
3 |
| Warranty Time |
2 |
