MACH Force-Xp 3 IN 304 Stainless Steel Cat-Back Exhaust System w/Black Tip Chevrolet Camaro SS 16-24 V8-6.2L (sc) M/T
This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance. Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The performance cat-back exhaust system is constructed of 3" mandrel-bent, 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.
- 3 in. Mandrel Bent 304 Stainless Steel Tubing
- Dual Mufflers
- 4 in. Dia. Tips Laser Etched
- Aggressive Sound
- X Pipe Balance Tube Evenly Distributes Exhaust Pulses
- Factory Hanger Locations
- Will NOT Fit Convertible Models
Application Summary:
| Year |
Make/Model |
| 2016-2024 |
Chevrolet Camaro |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Clamps Included |
Yes |
| Country of Origin (Primary) |
US |
| Exhaust Pipe Material |
Stainless Steel |
| Exhaust Type |
Cat-Back |
| Exit Location |
Split Rear |
| Exit Position |
Quad Split Rear |
| Exit Quantity |
Quad |
| Exit Style |
Straight |
| GTIN |
00802959493953 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Horse Power Increase |
13 |
| Inlet Inside Diameter |
3.000 in. |
| Inlet Inside Diameter (in.) |
3 |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3.000 in. |
| Main Piping Diameter (in.) |
3 |
| Material |
304 Stainless Steel |
| Mounting Bracket Included |
Yes |
| Muffler Configuration |
Dual/Dual |
| Muffler Count |
2 |
| Muffler Quantity |
Two |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| Sound Level |
Aggressive |
| System Type |
Cat Back |
| Tail Pipe Material |
Stainless Steel |
| Tail Pipe Quantity |
2 |
| Tip Cut |
Slant |
| Tip Diameter |
4.000 in. |
| Tip Diameter (in.) |
4 |
| Tip Finish |
Black, Black Powdercoated |
| Tip Material |
409 stainless steel |
| Tip Outlet Size |
4 |
| Tip Quantity |
4 |
| Tip Size |
4.0 in. |
| Torque Increase |
10 |
| Tubing Diameter |
3 |
| Warranty Time |
2 |
