ATLAS 2-1/2 IN Aluminized Steel Cat-Back Exhaust System w/ Muffler & Polish Tip Ford Ranger 98-12 V6-4.0, 98-08 V6-3.0L, 98-01 L4-2.5L, & 01-01 L4-2.3L
This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.
- Aluminized Steel
- Mandrel Bent
- Black Tip
- Increased 322 HP
- Increased Torque 28 ft./lbs.
- 50 State Legal
- 2 Year Limited Warranty
- Hassle Free Installation
- Free Flow Muffler
- Aggressive Sound
- OE Hanger Locations
Information:
Aluminized Steel; Hassle Free Installation; Free Flow Muffler; Aggressive Sound; OE Hanger Locations; Mandrel Bent; Black Tip; Increased 322 HP; Increased Torque 28 lbs./ft.; 50 State Legal; 2 Year Limited Warranty
Application Summary:
| Year |
Make/Model |
| 1998-2011 |
Ford Ranger |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Exhaust Type |
Cat-Back |
| Exit Position |
Single |
| Exit Style |
Straight |
| GTIN |
00802959492086 |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
2.5 |
| Inlet Inside Diameter (in.) |
2.5 |
| Inlet Size (in.) |
2.5 |
| Life Cycle Status Code |
Available to Order |
| Material |
Aluminized Steel |
| NAFTA Preference Criterion Code |
B |
| Outlet Outside Diameter |
2.5 |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| SDR Required Flag |
N |
| Tail Pipe Material |
Aluminized Steel |
| Tip Diameter |
3.500 in. |
| Tip Size |
3.5 |
| Tubing Diameter |
2.5 |
| Warranty Time |
2 |
